What are the instructions to build an Ozark Trail 13ftx10ft screen house?
Check out the related link for instructions on how to construct an Ozark Trail 13ftx10ft screen house.
How do you assemble a Ozark Trail JW-1612 tent?
This is for Northpoint 13' x 10' Screen House Style# TC-S130A-03.
http://s218.photobucket.com/user/Pokeytoesmomma/media/Screenroomtent2.jpg.html?sort=3&o=0
http://s218.photobucket.com/user/Pokeytoesmomma/media/Screenroomtent1.jpg.html?sort=3&o=1
How do you assemble Ozark Trail tent model 2080?
It took us a while to find the "secret instructions" zipped into the side of the bag. There's actually a zipper flap, with the instructions sewn onto the inside, that tell how to put the tent up. **two of the longer poles are the ones that get inserted into the green diagonal channels--place ends in grommet holes at bottom corner of tent **the shortest two are the "side" ones--they hold up the parts that pooch out to the sides of the tent--place ends in grommet holes at bottom of tent **the single longer pole goes from side to side on the outside and gets held in place with the plastic "channel" locks--ends of this one goes through grommet on top of each side "pooch" **there's a ribbon on top to tie all the poles together, and of course, you have to stake the bottom down once you've gotten it up. It's fairly straightforward. Of course, my husband is a genius at this type of thing :-) Hope this helps--finding the directions is key.
How do you set up an Ozark Trail 11ft by 8ft dining canopy?
There are:
3 rafters: 2+2b+2b+2b
4 legs : 1b+1b+4
4 gables: 1b+1
2 middle supports: 5+5b
I marked my plastic connectors with the assemblies that go into them to make it easier to remember.
The plastic connectors do not label the rafters, but they do label the legs and gables
Lay out the 6 plastic connectors so along the back you have a the leg-gable-(rafter)s in the 4 corners, and the gable-gable-(rafter)s midway between the gable-parts of the legs.
The 3 rafter assemblies go in the unmarked sockets, then the gables connect the rafters, then you put on the legs.
When i do it alone, I put just the 1b segment into the plastic bits, then pull the tent over the short frame, then walk around and make the legs longer.
The tent hooks into holes on the 4s.
How do you put up a Ozark Trail tent?
Well first you take the stuff out of the carry bag then there should be two poles that you connect then at one corner you should find one hole then just put one of the connected poles and put it in the hole once you get to the top you can see the pole again then you will see three holes put the pole you are using at the top and put it in the one right across and just put it all the way in then do the same to the other pole also when you do the second pole make sure you put it under the the first pole then you should be done if you done it correctly hope this helped you
How do you find replacement poles for Ozark Trail wt101610?
To find replacement poles for the Ozark Trail WT101610 tent, start by checking the manufacturer's website or customer service for specific parts. You can also search online retail platforms like Amazon or eBay for compatible replacement poles. If you prefer a more DIY approach, consider visiting local outdoor or camping stores that may carry universal tent poles. Finally, forums and outdoor enthusiast communities may offer suggestions for compatible alternatives.
Does anyone have instructions or know how to set up the Ozark Trail 20 x 13 Family Dome Tent?
yes I need help in setting up my 13ft x 10ft outdoor tent
The instructions for a 17ft x 13ft screen porch dome tent?
Large thicker poles 3 connect to the triple holder in the top and follow the sleaves and clips thru to bottoms bend poles to get the little metal pieces in bot. of pole. spread bottom out and stake down. thinner poles follow in the same fashion.
How do it get replacement parts for ozark tent 10x13?
Ozark is the in house label of Walmart. Your tent was probably made by a company called NorthPole Limited. Provide them with the model number and size and see what they can do; although you might save money buying a new tent complete. I have put the Ozark and NorthPole Limited contact pagesin the related links below. They should be able to help you with locating replacements local to you.
You might be able to get it repaired by a sailmaker/canvas repairer instead of replacing the 'top', if you still have it.
Where can you find instructions for Ozark Trail 10x13 screen room?
Hello to all!!! I hope this help someone out. I too had a problem with the assembly of my Ozark Trail Screen House 13' x 10'. Until I found this WED SITE BELOW. Just Cut And Paste: http://www.cyberhobo.net/wp-content/uploads/2007/09/wmt-1390s-inst_03.pdf GOD Bless You All.
Instructions for ozark trail junior tent?
If you have the junior dome tent, it's pretty easy. Mine came with two poles, and is 6'x5'. Simply lay the tent out flat, stake the corners, and lay the 2 poles diagonally across it. Feed the poles through the sleeves, and gently push them into the corner pockets one at a time to make the dome. Attach the rain fly on top, and viola. Done.
Where can you find instructions for Ozark Trail pentagon dome tent?
you put the black poles through the sleaves and the orange poles go through the clips and go through the hole in the sleaves also you should be able to see the half circle where it goes through it really should not be too hard the rain fly clips on the loops halfway down the middle cross poles in the front and back the rain fly has metel clips that go on the pole ring on the bottom. the loop on the rain fly goes through the stake on the mat in the front and you should be ready to camp i have this tent and really like it i hope i helped.
Where do you find replacement Joint parts for an Ozark Trail 2 room tent?
You can find replacement joint parts for an Ozark Trail 2-room tent at several locations. Check the official Ozark Trail website or Walmart, as they often carry replacement parts for their products. Additionally, outdoor retailers and online marketplaces like Amazon or eBay may have compatible parts. If you're unable to find specific replacements, consider contacting Ozark Trail customer service for assistance.
Where do you find a 9x9 Ozark Trail dining canopy?
You can find a 9x9 Ozark Trail dining canopy at major retailers like Walmart, either in-store or on their website. Additionally, online platforms such as Amazon or eBay may also carry this product. For local outdoor or camping supply stores, checking their inventory or website may yield results as well.
Where can you but a new frame for Ozark Trail WMT-99SLWG-B?
You can purchase a new frame for the Ozark Trail WMT-99SLWG-B at outdoor retailers such as Walmart, as they commonly carry parts for their products. Additionally, you can check online marketplaces like Amazon or eBay for availability. For specific replacement parts, visiting the Ozark Trail official website or contacting their customer service may also provide options.
How do you find parts for ozark trail camp cot?
Call the parent company, HKD Global at 888-280-7876. Be sure to have the part numbers for the item you are ordering: they supply branded camping supplies for a number of brands including Walmart's Ozark Trail, Broadstone, and Northwest Territory.
Over 350 miles (563 km) of the trail have been completed as of 2008, and the estimated length when finished will be at least 500 miles
How do you set up an Ozark Trail 13' x 9' two room cabin tent?
Spread out tent, stake corners, assemble collapsable "poles"by pulling each section until you have one long pole, you will find in an "X" pattern two small sleaves across the top of the tent..insert the poles into the sleaves. On each corner where you inserted the ground stakes you should find a plastic pin that you need to insert into the ends of the poles to stablize them. You're halfway there. There should be a shorter pole that needs to be inserted into an almost impossible to find small sleave on the front of the rain cover . the rain cover attaches with straps to the corner stakes. Don't forget to use some more stakes here and there.
Instructions for Ozark Trail JW-1080?
In: http://wiki.answers.com/Q/FAQ/3975-4, http://wiki.answers.com/Q/FAQ/4838-465 [Edit categories]
Coleman Tent
Huge selection of Coleman Tent items.
Yahoo.com
How_do_you_assemble_a_JW-1080_style_tent
[Improve]
Instructions for Ozark Trail JW-1080 1. Place tent on level, smooth ground and stake it down in the front and rear. Leave the side loops free. Make sure the tent is it taut at each corner and front/rear sides but not stretched too tightly. 2. Identify your poles by color tag (stickers) so that you have 4 Brown, 4 Blue, 4 Green, 4 Yellow, 2 Red, 1 White and 1 Pink. If your stickers are faded or not these colors then identify your posts this way; find 4 base poles with rubber/plastic feet (these are the Browns), find 8 poles the same length (these are the 4 Blue and 4 Green), find 4 poles with a 60 degree bend (yellow), find 2 poles with a ring attached in the center of the bend (red), find two remaining poles (pink and white). Note that the Browns, Blues and Greens are all the same length so if you have at least 12 of the same straight pole you are good to go. Basically, the side supports consist of 12 straight and 4 bent poles. The roof support consists of two straight poles (one pole with two male ends). 3. Attach the pink and white poles together to make the roof pole and run the pole through the roof sleeve (purple slot running across the roof from front to back). 4. Create two arches by attaching the poles in this order : Brown, Blue, Yellow, Green, Red, Green, Yellow, Blue, Brown. Make sure your two arches are the same size and shape. If not, you've not properly marked or aligned your poles. 5. Lay the arches on the tent so that the red poles are centered with the roof pole. The legs of the arches will criss-cross on the sides. 6. To support the tent you will have to momentarily detach the arches at two places in order to run the poles through the nylon loop supports at ridges of the tent roof. Detach the Yellow from the Green on each side of each arch and pass the green pole through each nylon loop. Reattach the Yellow pole. Make sure the roof loop does not fall below the yellow pole's bend. 7. With one person at the front and one person at the rear slip the metal loop of the red pole (top of each arch) over the roof support pole then loop the nylon loop support over the roof support pole so that the red pole is between the roof support sleeve and the topmost nylon loops. If you find this too difficult at this time, go to the next step and then come back to this step once you've set the arches on their ends. 8. With one person on each side of the tent (on the sides now) grab a leg of each arch in each hand, lifting and pushing each arch leg toward the center. The roof should rise. 9. Once tension is achieved, and the roof is raised, secure the feet in one of three ways; 1) slip the feet of the arches into the center nylon loop (on the ground). You may have to pull the Brown poles off (one at a time) in order to slip them into the loop. Just make sure you keep tension on the pole(s) as you remove and reattach Brown poles. 2) take off the rubber feet and push the poles into the ground anywhere along the side so long as you have good tension on the roof supports, 3) tie the arches together at the point they cross. 10. Drive stakes into the loops on the side if you can. There's not much room left once the poles are in there so don't force the stake in if it's too difficult or you might tear the tent. Secure a tarp over the whole tent of there is a chance of rain. Good luck.
Does anyone want to sell me one 3 way gable leg R for an Ozark Trail 11x8 dining canopy?
no, no one really wants to sell you a 3 wya gable leg r for an ozark trail 11*8 dining canopy