0
What else can I help you with?
How many pin IC 8086 is?
40 PINS
What is the clock frequency of 555 ic timer?
The 555 IC timer does not have a clock.
Ic 74180 used for?
The 74180 is a 9-bit Odd/Even Parity Generator and Checker
What does the 555timer IC operates?
555 timer is used to generate clock signals in the ic 555 timer the pin no 8 is represents vcc
What is the meaning of postfixes of 8086?
It is mightily referring to Microprocessor 8086 . I think you saw "8086 microprocessor". The 8086 is nothing it indicates the number of microprocessor same as Digital or analog ic's . 8086 microprocessor has 20 Address buses and 8 data buses which has 1 Mb inbuilt memory for performing several type of airthmatical and logical operation.
How many pins in IC 8086?
it have 40 pins 1st one is ground and last one is Vcc. Itplh = 450
What is triangular wave generator?
Triangular wave generator is a device (for eg NE555 timer) that generates a triangular wave by integrating a square wave. In applications an ICL8038 IC can be used to generate all types of waves.
Why it is called um66?
um66 is a melody generator cmos ic it is a three terminal ic pin no: 1 is set to ground, and pin 2 is Vdd pin 3 is the output melody signal this ic generally operates from 1.5 to 5 volts it is generally used in toys, bells etc................
What is ic 8086?
8086 is a 16- bit microprocessor. It has 20-bit address bus. It has 14 16-bit registers. It has multiplexed address and data bus. It provides 33% duty cycle. 8086 supports multiprogramming. It is designed to operate in two modes, i.e. min and max. you can download the simulation program(for running your programs on your computer) at - http://www.ziddu.com/download/15018415/emu_8086.zip.html
What is a 556 function generator IC?
A 556 IC is a dual 555 IC in one 14pin chip. With that said it composed of two timers capable of running in Astable, Bistable and Monostable modes. The 556 can be used as a function generator once the appropriate external components are connected. One note about using the 556/555 as a function generator is that you cannot achieve a perfect 50/50% duty cycle where the time on is equal to the time off, this is due the characteristics of the internal components having a different charge/discharge rates.
Why clock frequency of 6.14 mhz is used in 8085 microprocessor?
Because it is the top operating speed for that IC
What is the function of crystal in IC?
Not sure what your question means. In an IC (Integrated Circuit) the circuit is etched onto a single crystal of Silicon. So the crystal forms the semiconductors within the IC. or Quartz Crystals are used in electronics as stable oscillators. They vibrate at precise frequencies, which can then be used for radio transmission or reception, or can form a time base for clocks or clock pulses, used for digital electronics.
