I know that a company named TEMco makes a 380v to 120/208 transformer. You can try contacting them for your specific application I will attach their website for you.
220 volts alternating current
How to increase 220 VAC to 400 VAC? Please advise me about it.
U.S. 240 VAC breakers are always double pole since they are protecting two legs of the circuit.
The answer to this is country-specific. In the United States: Residential 120 VAC. Commercial also uses 277 VAC Elsewhere in the world: 220 volts to 260 volts, most frequently 230-240 volts AC.
In an emergency it will heat half your oven or half your water heater because you only have half the supply voltage. The wattage must still meet the demand for the half power, Some special connections may be necessary to use 110 temporarly on the 220 circuits.
The standard voltage is the Republic of Ireland is 220 VAC at 50Hz.
It should work with no problems, since the frequency does not affect the work or the iron heater.
You can purchase an inverter that accepts 220 VAC 50Hz input and produces 120 VAC 60Hz output. You can purchase an inverter that works from single phase or three phase electricity and can produce single phase or three phase output. You must specify the 120 VAC current load when choosing the inverter. You must also be sure the 220 VAC 50 Hz supply has sufficient current capacity to operate the inverter with the required 120 VAC current load. The inverter works by rectifying the 220 VAC 50 Hz input into DC energy. The inverter then uses switching solid state components to produce 120 VAC 60 Hz output from the DC energy.
220 volts alternating current
How to increase 220 VAC to 400 VAC? Please advise me about it.
Voltage has nothing to with frequency
The 3 phase power in turkey is either 380 VAC or 400 VAC.
No
They are in tandem because they power a 220 VAC circuit, rather then a 110 VAC circuit.
Dubai uses 220 VAC at 50 Hz (in the USA, we use 120 VAC at 60 Hz). They also use the G type plug.
Answer for UK and countries running a 50 Hz supply service.The voltage potential of 380 volts is not common to North America.It will probably be difficult to tap into the plug to get the voltage.If you have a three phase 380 volt supply from a source then you can obtain a single phase voltage of 220 volts from it. 220/380 is a wye voltage connection. 380 divided by 1.73 will give you 220 volts. L1 - N = 220V, L2 - N =220V, L3 - N = 220V. L1 - L2 = 380, L2 - L3=380, L3 - L1 = 380.
No 380 volts is too wide a spread to use a 220 volt motor on.