|
modem
|
wireless router - - - wireless PC ...
| |
| +-------------------- wired PC ...
|
hub ------------------- wired PC
\------------------------ wired PC ...
Routers have extra ports for wired PC but if you need more you need to have a hub. A hub though uses a cross-over cable to the router all the rest uses a regular network cable. All PCs of the network must point to the router's IP address as the default gateway and the network connection is allowed in their respective firewalls if any.
When there is no wireless connection an ethernet splitter is what is used so that there is internet available.
Yes but please don't do that. Use a wireless switch or router.
Does it have a wireless card? Is the driver installed? Is your wireless access point on? Is the right password put in? Have you tried the card in a different computer? Different network?
I have a computer setup with 2x 100w speakers and a 200w amplifier, i also have a bluetooth wireless D100 speaker, i am enquiring if there is any way to be able to essentially 'split' the audio so that it splits between the bigger setup and the smaller wireless speaker, wishing to do it wireless with the bluetooth, not through a jack splitter cable.
Yes, you can. Wireless connection is not different from wired connection in a sense of functionality.
No, they are different devices. A modem is used for computer, let's say a laptop. Whereas, a wireless router can be used for multiple computer connections, through high-speed internet.
You can get a couple of different versions of wireless speakers the WL6000 - Dell 5.1 Surround Sound system and the SoundOn Media 210 wireless USB speakers.
Yes and No You could you Wireless internet from your neighbor if you can get a signal ,BUT its illegal if they catch you. Wireless Computer service=wireless internet?
You need a computer to access the internet. You need a modem, and a wireless card in your computer.
Wireless Yes Wireless is what requires a driver. Because the circuitry in a wireless keyboard is different as it must send data wirelessly, meaning the computer must know the receiver has a way to accept and convert the signal into usable data for the computer to display. That knowledge is called a driver.
You need to change the network card in your computer with a wireless one, and buy a wireless router. Need 2 items: wireless router wireless network card
If the printer is connected to another computer via a cable, then you need something for the wireless computer to connect to. It would either have to connect to a wireless router or you could have a wireless card in the other computer and configure the two to talk to each other. But using a router is a far better solution. Then you can setup the printer as shared from the first computer and configure the two comptuers to be in the same workgroup and share it that way.