If it's a GFCI receptacle and the button is not resetting then change the GFCI outlet.
First, check the circuit breakers; make sure they are all ON. Find out if any other outlets on the same breaker are working; it's always possible that a breaker is faulty. If the breaker is on and everything else on the circuit is working, it could be as simple as a poor connection inside the outlet. Also even though the outlet is not a GFCI, it may be fed from a GFCI outlet. Check near by outlets to see if any are GFCI and are tripped.
Yes, but you can feed multiple outlets from one GFCI outlet. Make the first outlet fed in the cicuit a GFCI. Search for GFCI outlet with Google, etc. and I'm sure you will find an explanantion of how. Most GFCI's come with instructions also.
The last answer is incorrect. Some GFCI's are designed to light up when working, some are designed to light up when tripped, some are designed to have different color lights depending on normal or tripped conditions. The only way to tell if the receptacle has power is to TEST it. If the GFCI is supposed to be tripped and power is still available, it is either not operating properly or it is not wired properly. If in doubt, have an electrician inspect it for proper operation. Incorrect answer: >>Provided that the GFCI is wired correctly, the indicator light indicates that the receptacles have power. If the light is off there is a ground fault. In other words, the light should always be on.
In a word NO, that will not cause either GFCI to trip. The correct term is GFCI (Ground Fault Circuit Interrupter)
If it's a GFCI receptacle and the button is not resetting then change the GFCI outlet.
A GFCI outlet has a TEST and RESET switch. Press reset and see if it fixes problem. If reset won't stay in that means that a ground fault condition is present and may be on another outlet that is fed from the tripped GFCI. If this isn't the problem check the main breaker feeding the GFCI and ensure it isn't tripped. If none of this works the GFCI itself may be bad. If you have a Volt Meter you can remove the outlet from the wall receptacle and make sure there is voltage present. You can also see if there is a branch circuit connected. To troubleshoot you can disconnect the branch circuit and then try reset. If you have voltage on input and GFCI won't reset with branch circuits removed, replace the GFCI.
First, check the circuit breakers; make sure they are all ON. Find out if any other outlets on the same breaker are working; it's always possible that a breaker is faulty. If the breaker is on and everything else on the circuit is working, it could be as simple as a poor connection inside the outlet. Also even though the outlet is not a GFCI, it may be fed from a GFCI outlet. Check near by outlets to see if any are GFCI and are tripped.
Not if the GFCI breaker is supplying the circuit you are wanting to put the GFCI receptacle into.
Ground wire is loose or disconnected somewhere in that circuit.
Yes, but you can feed multiple outlets from one GFCI outlet. Make the first outlet fed in the cicuit a GFCI. Search for GFCI outlet with Google, etc. and I'm sure you will find an explanantion of how. Most GFCI's come with instructions also.
The last answer is incorrect. Some GFCI's are designed to light up when working, some are designed to light up when tripped, some are designed to have different color lights depending on normal or tripped conditions. The only way to tell if the receptacle has power is to TEST it. If the GFCI is supposed to be tripped and power is still available, it is either not operating properly or it is not wired properly. If in doubt, have an electrician inspect it for proper operation. Incorrect answer: >>Provided that the GFCI is wired correctly, the indicator light indicates that the receptacles have power. If the light is off there is a ground fault. In other words, the light should always be on.
No, except that you insert the wires into the holes on the back of the outlet. The power in connects to the LINE side of the outlet and power out connects to the LOAD side of the outlet. This is clearly marked on the back of the outlet. This will not only protect the outlet with the GFCI installed but all outlets receiving their power from that GFCI. If you do not want to protect the outlets receiving power from the outlet then connect that outgoing wire to the LINE side also. But know that only the outlet with the GFCI will be protected and all other outlets will not be GFCI protected.
Yes you can. Lots of blow dryers have GFCI protection built in.
In a word NO, that will not cause either GFCI to trip. The correct term is GFCI (Ground Fault Circuit Interrupter)
I assume you are hard wiring it and not plugging it in. The power coming into the GFCI outlet connects to the line side of the GFCI outlet. If you want the outdoor timer protected by the GFCI then connect the wire going to the timer to the load side of the outlet. If you do not want the timer protected then connect it to the line side. On the back of the GFCI if you look closely you will see Line & Load marked on the back.
It's probably a bad connection inside one of the outlet boxes or possibly a tripped GFI.