On this vehicle it's super easy. On the backside of the headlight there are two plastic tabs. Pull those up and the whole headlight assembly will slide right out.
I've also included an instructional video that shows you exactly where they are located and what needs to be done.
Hope this helps,
1ATony
you will probably have to take the complete headlight assembly out to get enough room to change the bulb.
please answer the question
You will need to take the complete headlight assembly loose or out to get to the bulb to change it.
there are about for screws that you have to unscrews after hat you are home free
you need to remove the front fascia to remove the headlamp to change the bulb
With great care.
open hood, remove the little plastic/rubber cover above each headlight, one will be right on top the other is just below behind the headlight.
remove front headlight assembly to get at horn,it is down below light assembly..
Pull the complete headlight assembly out to get to the bulb.
Yes it will fit but you will need to change the computer and wiring for it to work.
yes it will work but you will have to change the wiring harness going to the injectors i did do it myself
www.vwvortex.com they have the answers, you have to power