pull hood release open hood on top of head lights 2 special head torx has to be unscrewed then pull out headlight remove bulb and repeat for the other side
From the inside of the door. Its a pain.
No the Chrysler Sebring did not have that feature until 2008.
A 2000 Chrysler Sebring was not built with a cabin filter.
Get the headlight, and see if its just a bulb(from the rear installs) or it's the entire light(installs from the front) ..a library will most likely have a shop manual for free
where do I find the battery on a 1999 Chrysler sebring, can't find it in the engine compartment?
A 1999 Chrysler Sebring does not have a mass airflow sensor.
The driver side front tire, and inner fender liner need removed.
today I change my own in my 97 sebring, I will let you know when I finish how it went
That will change constantly and it really depends on what you mean by kits. See sources and related links below for a popular online choice.
Read the manual.
you'll need Allen wrenches. you must pop the hood and remove the headlight assembly. if I remember correctly, there are about four Allen screws to take out. once it is out, you just unplug the old bulb and plug in the new.
Change it every 100,000 miles.