the transmission oil filter is inside the transmission oil pan which is located on the bottom of your automatic transmission which is held on by approx 20 some bolts. There is no way of draining the oil from this pan prior to removing all these bolts, so when you remove the pan bolts it will be full of tranny oil. after you remove the pan you will see the filter attached usually by 2 bolts to the bottom of your tranny. change the filter , clean the pan and tranny bottom, replace the gasket and replace the pan. Find the filler tube for the transmission and begin to replace the fluid. after filling it to manufactuers specs. start the car and check the level again while the oil is hot and the veh is running.
today I change my own in my 97 sebring, I will let you know when I finish how it went
All there is to do is to change the fluid and the filter.
It is inside the transmission pan.
A 2000 Chrysler Sebring was not built with a cabin filter.
It is inside the transmission pan on the bottom of the transmission.
You will need about five quarts.
It is on the bottom of the transmission, inside the pan.
It is inside the bottom of the transmission. You remove the pan to access.
A 2001 Chrysler Sebring does not have a cabin filter.
No, a 2005 Chrysler Sebring does not have a cabin filter.
It depends on what filter you are trying to change, you need to be more specific.
A 2001 Chrysler Sebring does not have a cabin filter.