How do you make an Egyptian pyramid out of styrofoam?

Answer 1

Building a Model PyramidYou would need lots of glue to hold it together.

• You might search online or go to a library to look for tips or patterns, or talk to an artist or art teacher for tips on how to do it. If you cannot find a pattern, you could study pyramids and use a picture to make one. Of course, you would have cut the sticks to length as you went up the pyramid and put each stick in a little from the one below it. It shouldn't be extremely hard to do even without a pattern and should be fun

• Cut four sticks of the same length and glue them together in a square frame.
• Step 2
• Cut three sticks, one long enough to reach from one corner to another diagonally. Then cut two short sticks long enough to reach from the two remaining corners to the center stick. Glue all these sticks in place on the square frame.

1. Step 3
2. Cut four sticks long enough to reach upward from the corner of the square frame slanted to the center. Glue these four sticks in place to form a pyramid shape.
3. Step 4

Cut sticks and glue them in place to fill in the four sides of the pyramid.

1. Step 5

Clean any hot glue strings that may remain from the model pyramid by simply pulling them off.

Answer 2

You will need :

• 1- to 2-inch-thick Styrofoam sheets
• Paring knife
• Styrofoam cutting tool
• Toothpicks
• Sheet of foam core
• Figurines
• Sand
• Glue for Styrofoam
• Dowel

Answer 3

It depends if you want it hollow. If so, I would cut out 4 sides and one bottom and glue them together with a hot glue gun. if you want it solid, I would get an exact-o knife and carve it.

Answer 4

You need a knife, a big block of Styrofoam, and plenty of time on your hands. Start whittling, buddy.

Answer 5

Cut out four identical equilateral triangles and tape them together.