from a 1992 what please? in regards to your serpentine, the engine should, if your lucky have a diagram of how it goes.
how to replace a serpentine belt on 1992 grand am 2.3l
Hey Joe==Take the serpentine belt off and then take the neg battery cable off then remove the wires from the alternator then take the bolts out and remove the alternator. GoodluckJoe
If it is the same 3800 engine as the 1993 Lesabre--very simple. Alternator is right on top of the engine. Loosen the serpentine belt ( tensioner) - remove the mounting bolts that hold the alternator on the bracket- remove the wire connections.
Open the hood and look. If it has a serpentine belt there is a tensioner.
Assuming you have a serpentine belt on that 3.3L engine, the tension on the alternator would be controlled by the idler (tension) pulley. The alternator is stationary.
IN THE ALTERNATOR
see link below
Remove the wiring harness from your 1992 Plymouth Grand Voyager alternator. Remove the alternator belt. Remove the alternator retaining bolts. Reverse the process to install your new alternator.
No you do not.
I don't know too.
how do you replace ignition switch on a 1992 Chevy cavalier 2.2 4 cylinder
It is located on diver side behind the cylinder head.