First you will need to remove the Harmonic Balancer pulley from the engine. This may prove to be difficult being the bolt that holds the pulley on is tightened to 220ft lbs. once the bolt is removed the pulley should just slide off. behind the pulley is the front crankshaft seal, use a good seal remover tool to pry the old seal out. reinstall the new seal with a seal installation tool. make sure the crank pulley is tightened back to 220ft lbs.
go for it
Locksmith.
the fuel guage in my 1993 Saturn goes wiggling back and forth. how do i fix this problem?
Between the front bumber and engine
It is an integral part of the front engine cover. It is driven by the crankshaft. It is an integral part of the front engine cover. It is driven by the crankshaft.
a 1993 doesn't have a cam sensor. the crankshaft position sensor is located on the front of the engine directly above the crankshaft pulley
Replace the chain and both the cam and crankshaft gears.
check the front of the engine at the bottom for an electrical plug
There is no such thing as a Fly Wheel Belt, unless your refurring to the timing belt which is hooked to the crankshaft which the fly wheel bolts to... The Timing Belt is on the front of the engine.
buy a subframe from the junkyard and find someone to replace it for you. odds are you aren't equipped to fix it yourself. you will probably need a control arm too.
Yes it is in the front of the engine at the 10 o'clock position of the crankshaft pulley.
behind timing cover on front of engine if its a 2.0 ltr ohc