answersLogoWhite

0


Best Answer

take the steering wheel off, remove the safety plate and there's a small screw that is about the one 'o clock position on the column. take that out. also, get a manual...ah-ha!

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you replace the ignition lock cylinder on a 1994 GMC Jimmy S-15 with tilt steering?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you replace ignition switch on 97 gmc jimmy?

Pull your steering colum apart along with steering wheel and dash plastic, ignition swith is next to the key tumbler. Swap the parts.


How do you remove a lock cylinder for a 1988 gmc jimmy?

if it is the ignition lock cylinder, first disconnect the battery, you need to remove the steering wheel ,turn signal switch , etc, then you need to insert the ignition key into the lock cylinder, turn it to the run position,then pull the cylinder out, reverse the operation to install the cylinder,


Gmc jimmy engine stops after dash lights flash?

I have been researching for a fix to get my dash lights working again and have come across your problem and the fix seems to be that you have to change the ignition switch which is a wire harness under the steering colum attached bellow the key cylinder. If you look up jimmy ignition switch you will find the info you need.


How do you change the ignition switch on a 1996 GMC Yukon?

howdo you change an ignition switch on a 1996 gmc jimmy howdo you change an ignition switch on a 1996 gmc jimmy


How do you replace the heater core on a jimmy?

How do you replace the heater core on a jimmy?


How do you remove a key that is locked in the ignition on a 1999 GMC Jimmy?

There is a broken wire below your shifter in the console. This controls a solenoid that releases the key. The shifter in the center consle has a part that controls a current to solenoid in your steering column. A quick fix is a nail or piece of wire to release the key. This is in the steering column. There is a pop out that must pushed in to release the key. A longer term fix to replace the part in the shifter.


Where do you put the power steering fluid on 1994 gmc jimmy?

Power Steering pump reservoir.


Gmc jimmy air bag clock spring how to replace it?

The clockspring is replaced by removing the airbag, and by removing the steering wheel. From there disconnect the old clock spring, and put in the new clock spring, and replace everything in reverse order.


How to replace a heater core in a 1992 GMC Jimmy?

I need to know how to replace a heater core in a 1992 GMC Jimmy?


Why won't the steering wheel on a 1999 Jimmy unlock?

Your battery is about dead .


How do remove the key cylinder in a 1998 gmc jimmy?

If you have the "PassLock" Security system on your vehicle, you MUST take it to the dealer to have the ignition changed out. The will have to reprogram the security system to match. If they don't your security may stay engaged which will cut of the fuel.


Where can you find a steering column diagram for a 1989 GMC Jimmy?

You can find a steering column. Diagram, for a 1989 GMC Jimmy, at most GMC dealerships. You can also find the diagram at most auto-parts stores.