yes
Follow the instructions in the owner's manual. If you don't have one, call Colt and they will send you one.
Go to web site listed below and scroll down to Colt MKIV Series 80 & 90 It will provide you with the manual in pdf form.http://stevespages.com/page7b.htm
Go to: http://stevespages.com/page7b.htm Scroll down to Colt MKIV series 80 .380. It will give you a copy of the manual with everything you need.
You can download a manual from the Colt webiste; ask a gunsmith for help
Post 82. YOu will have to call Colt to narrow it down any further.
Try to cock it while pushing a cleaning rod down the barrell
open the cylinder. if just cleaning......run an oil rag down the bore and cylinder. If fired, clean bore and cylinders with a bore cleaning solution, dry, then apply a light coat of oil for storage....................
First, if you do not have a owner's manual, contact Colt. If they have one they will send it to you or direct you to a site to download one. If Colt is not helpful, check on line auctions, estate sales, garage sales or pawn shops. In the meantime, I would suggest you find a gun shop/gunsmith and ask for help.
Go to this website, http://stevespages.com/page7b.htm and scroll down to Colt .25 or Colt .25 hammerless and it will give you the manuals with all the instructions on how to disassemble.
it was made by ITHACA (not colt) in 1943.................If your slide reads Colt, then sometime down the road a colt slide was put on your Ithaca receiver...............that is not unusual to have happen.................
Post 1978. You will have to call Colt to narrow it down further.
Post 1978. You will have to call Colt to narrow it down further.