I don't know for sure until gorilla glue dries but when you see it starting to clear up and becomes white then it is dried.( It takes about 30-60 minutes.)
You blow dry it or heat it
They do make one that will dry clear. It depends on which you are using. There are a few different types
if it is glazed ceramic tile - let it dry fully (I let mine dry for a few weeks) then CAREFULLY pop the glue off with a chisel. Hold the chisel so the flat end is up and the beveled end is on the tile and gently push the tip of the chisel into the (expanded) gorilla glue. hit the end of the chisel with the palm of your hand and the glue will pop off the ceramic.
There is a 'first aid' page on the vendors web site that tells you what to do about the various sorts of gorilla glue on your hands. I will place the link below.Good luck with thatDW- 40 really works! i spayed a little bit one both hands and washed it off almost immediately. and it worked ! it does dry out your hands a tad though hope it works! good luck :)
As long as it can cure in dry conditions,
You blow dry it or heat it
The word "glue " alone is inadequate. There are many kinds of glue and each may take different times to dry.
If it's applied to a dry surface it will continue to 'cure' underwater.
They do make one that will dry clear. It depends on which you are using. There are a few different types
A PVC pipe glue will take at least 4 hours to dry. 12 hours before putting water pressure in it.
It can take 2- 3 1/2. Depends on how much glue you put on the paper mache and if you used the right glue.
If water has been mixed with your glue, then it's a type of PVA glue. Mixing water with it is not a good idea, as it takes longer to set and is not a strong joint. It may take up to 2-3 hours to dry to the touch, and at least 12 hours to fully cure, due to water's time to evaporate totally.If you want good results from glue it's usually best to use them as they come.
if it is glazed ceramic tile - let it dry fully (I let mine dry for a few weeks) then CAREFULLY pop the glue off with a chisel. Hold the chisel so the flat end is up and the beveled end is on the tile and gently push the tip of the chisel into the (expanded) gorilla glue. hit the end of the chisel with the palm of your hand and the glue will pop off the ceramic.
It usually takes 24 to 48 hrs.
It takes about 2 to 5 minutes but no matter what you do, don't touch it.
Depends on how thick it is. Making questions as accurate as possible can help others to give equally exact answers. EX; How long does 2 mm glitter glue take to dry. Any question with a variable will yeild a variable answer.
Name your glue - we don't know what "glue" is unless you tell us. Some glues dry in 5 minutes, others take 10-12 hours.