It varies. It is dependent upon it's exact chemical makeup, which varies from location to location. The American Petroleum Institute has developed a measurement system (called API gravity) of various oils and tars which measures the weight at 60 degrees fahrenheit (15C) and compares it to that of water. An API gravity of 10 is equal in weight or density to water. Lower gravity is heavier and higher gravity is lighter. Bitumen, being a heavy tar could have an API gravity anywhere from 8 to 11, meaning it may or may not float in water. this also means that its weight per liter also falls between 1.14 Kg and 0.99 Kg.
1 kg bitümen to kg
Approx 0.96 litres.
1 liter of bitumen per Kgs.
1
One
29
1 Kg
A liter of what? A liter of mercury will weigh considerably more than a liter of water. A liter of grandma's best turkey gravy will weigh somewhere in between. That said, a liter (1000 ml) of water will weigh 1000 grams, or 1 kilogram, (approx 2 and 3 oz). A liter of water is 1 kilogram and that equals 2.2 pounds good ans wer but its spelled LITRE
92.4 cents per liter = about $3.50 per gallon.
1000cL equals 10L* There are 100cL per liter
46cL = 0.46L* There are 100cL per liter
There are about 33.8 fluid ounces per liter.
830 to 900 grams per liter
(Micrograms per litre)/(gram molecular weight of solute) = (micromoles per litre).
0.54 kg / litre
Given that a liter of water does weight about a kilogram, there would be a million milligrams of water per liter, so yes, one milligram per liter does work out to be one part per million (ppm).
Approx 9.1 newtons.
Only if you mean water, you can say 1 liter of water weighs one kilogram.
You cannot. The problem here is you have weight per area and you want to convert to weight per volume. You need a third dimension to the area to calculate this.
formality is the number of formula weight units of solute per liter of solution
The molarity of a solution is the number of moles of a solute per liter of its solution. The normality of a solution is the number of gram equivalent weight of a solute per liter of its solution. As I said before, and precisely, Molarity is moles of solute per VOLUME of solution!
obviously, specifics depend on the specifics of the question, but generally, adding weight will decrease fuel efficiency.
Density is just weight per unit volume, e.g. 1kg per liter. So just determine the weight and volume of your mixture.
The density of bitumen is about 1 tonne per cubic metre at 20 deg C.. The same as water