July 1, 2010. I recently had a timber retaining wall installed. All work was done by hand. It took 4 men approx. 19 hrs to dig, build, and back fill a 4.5' X 19' wall made of 12' 6"X6" .4 pcf pressure treated timbers, cradles, tie backs, rebars, screws, cement, mortar, stone, sealer, and glue. The cost worked out to 35$ / sq. ft. These men worked very hard and build a very high quality wall. I wanted .6 pcf or higher timbers but it made the job unaffordable.
It all depends on the height, materials used and the length. If you can let me know what you'd like to use (i.e. retaining wall modular block, chopped stone, poured-in-place concrete) I can probably give you a pretty good idea.
cost of steel 12''x18' i-beam per linear foot?
68102
per square foot titanium cost on avg. $215
how much to caulk floor joints per linear feet
Pergolas vary in cost depending on the material used and complexity of the design. The best way to determine cost is to sketch an idea of the pergola and send it to a timber framing company for a quote. Roughly, the cost will range from $10 a board foot of timber to over $50 per board foot plus the cost of the earth work and foundation.
It costs about $9.00 per cubic meter
A timber-wolf pup may cost $400-$1,000 depending on where you get it.
It all depends on the height, materials used and the length. If you can let me know what you'd like to use (i.e. retaining wall modular block, chopped stone, poured-in-place concrete) I can probably give you a pretty good idea.
630
On average a bull elephant is 10 feet tall, and a timber elephant is about 9 feet tall. A bull elephant is about 1 foot taller than a timber elephant.
About as much as a ankle and a wrist
how much does 3/8 clear annealed glass cost per square foot wholesale
cost of steel 12''x18' i-beam per linear foot?
In Idaho, the cost for ONE foot is around $6,000.00.
In most areas it cost less than 50 c a square foot to buy.
1.50 per square foot