What would you like to do?
The price to replace a blown head gasket on a Chrysler Sebring V6 should be around $1,000.00. The price can vary depending on where you have the repairs made or if you replace it yourself.
1 person found this useful
Was this answer useful?
Thanks for the feedback!
It varies with what part of the country you live in. Call a couple of local garages and get estimates. Goodluck. Joe The cost is also going to depend on the make/…model of your vehicle and other repairs that may be necessary. Cheaper repairs may not include resurfacing or complete diagnostics, so cheaper is not always better. If you are not going to consider doing the job yourself then call around to a few "brand name" mechanics and then a few small ops mechanics to get a good idea of what the repair will cost. Ask them whats included (no $urprises later) and always assume that if they will not take a little time to talk to you about it then they may not take the time to double check their work or do it right the first time. There will certainly be at least one mechanic shop that will have complete answers, offer a willingness to help and explain the process, and fair prices too.
When repairing cars, it is important to know the cost going into the repair. To replace a head gasket for a 2002 Ford Focus it will cost between $20 and $190.
It can cost anywhere between about 700 dollars and about 1500dollars to replace a blown head gasket on the 1999 Dodge Neon. Thisvaries depending on location and condition of t…he vehicle.
It can cost between $30 and $100+ to replace a blown head gasket. It will depend on where the person buys the part and if a shop does the change out or not.
It depends on the make, model, year, engine, AC or non-AC and your location, need more info.
I just got an estimate on my 1999 Suburban, and it came to $1939 for a head gasket job. He offered me a used engine with 75K miles for $2500 installed..
If it has a 5.3 engine, first have the cylinder heads pressure tested. Heads with a casting # of 706 like to crack in the number 1 head bolt hole. If this happens, replace hea…d.
I would say around 300 dollars..
around 2000 for both head gaskets and around 1000-1500 for one side only
How much should it cost to replace a blown head gasket for a 197 BMW 528I
If you have to change one side, you might as well change the two. Its about 12 hours labor, plus a valve job at around 200 to 300. bucks per side, as long as there are n…o parts to replace, plus you will need a gasket set. It all depends on where you pay your labor, friends are the best bet.
you mean a valve cover gasket i think
Heres the deal, to replace a head gasket it is obviously different by car and make and model, but a good formula to go by is about three to four times the cost of the parts. … The average cost of parts to do this job is around 3 to 4 hundred dollars so expect to pay around $1200 to $1600 on the job. There are many ways other than that to figure it out like estimated hours.. On average a head gasket replacement will take 7 to 9 hours labor plus parts. This is a good figure to use however, most vehicles that have a blown head gasket are quite old and you should use the cost of doing the job to consider whether it is better to replace it at that point. If the car is newer, then the repair cost should be compared to it's relative value, many vehicles are worth putting the money into I have been buying cars and vans that have blown head gaskets for myself at a reduced cost and I have had great success repairing them without disassembling the engine. Its very simple to use and is a permanent repair. It costs 20.00 and its added to the radiator. It mixes with antifreeze and does work if you follow the simple directions. My cousin has a garage and has been using this stuff. Its very hard to find and is not found in part store's if you want any email me firstname.lastname@example.org Sealed up a blown head gasket and cracked block.Thanks Carl Shilanskis1995 corsica 3.1 with a blown head gasket, 3k miles and so far so good. Hope its stays that way. Fred
It all depends on where you get the work done. It can cost anywhere from $1200.00 - $3000.00. Depends on the hourly labour rate.
usually somewhere around 3 to 400 dollars depending on what motor you have. Sometimes a little more on the SOHC 4.0 a little less on the OHV 4.0
Remove intake and exhaust manifolds, and then remove the head. This is a major repair that should only be attempted by someone who is competent.
Expect to spend from $800 to $1200.