How much water can a barrel of 27 inch diameter hold?
That would all depend on the barrels height.
1 person found this useful
Answer . 489.76 gallons of water.
Answer . 84.8230 inches
Answer . C=(2)(3.14)r 27=(2)(3.14)r 27=6.28r r=4.29936 d=r(2) d=8.599 The diameter is 8.599 inches (or 21.841cm)
Wait, what? I believe diameter is the measurement straight across the middle of a circle, not a unit of measurement. So if a circle were to be 27 inches in diameter, it would …be 27 inches from one side of the circle to the other, with the line going exactly through the center of the circle. Basically, cutting the circle in half.
I assume you mean 5 foot diameter AND 6 inches deep: 9.8125 cu.ft. = 73.3975 gallons
Would that hose be 5" inside diameter, or outside? If the hose is 5" outside diameter, what it the wall thickness? If the hose doesn't have stoppers on the ends, it isn't go…ing to hold any water because it will all leak out.. Would that hose be 5" inside diameter, or outside? If the hose is 5" outside diameter, what it the wall thickness? What makes you think that there is any water in the hose? Maybe the hose is new and never been used. You didn't think about that, did you?
i paid 75.00 for mine
How much psi is produced at opening when barrel is full 20 gallon water barrel 3 feet off the ground there is a 2 inch diameter opening at the bottom of barrel?
1 gallon of water weighs 8.345404 pounds, therefore, 20 gallons weighs 166.90808 pounds.. As this is trying to get through a gap of 3.14159265 square inches (Pi times the 1 i…nch radius squared), then the pressure in pounds per square inch is 166.90808 pounds divided by 3.14159265, which equals 53.128492.
That completely depends on the length of the pipe.
haha eight of beyonces bums
48x27x19=24624 cubic inches of water or 106.6 gallons of water
Volume of a cylinder = (pi) (radius) 2 (length) Volume = (pi) (0.25-ft) 2 (20-ft) = 1.25 (pi) cubic feet = 3.927 cubic feet = 29.376 gallons (rounded)
If 27 inches is the diameter, then that is the diameter. If 27 inches refers to the radius, you must multiply it by 2 to get the diameter.
V = pi*r 2 *h = pi*(1.5/2) 2 *(100*12) cubic inches = 2120.6 cubic inches.
C = pi*d so d = c/pi = 27/pi = 8.594 inches.
The diameter of a circle with a 27 inch circumference: 27/pi = 8.594 inches rounded