1 cu m = 1000 litres
it takes 50m × 25 m × 2 m = 2500 cu m
= 2,500,000 litres
= 2.5 × 10⁶ litres (= 2.5 million litres)
= 2.5 Ml
It takes 2500 cubic metres.
Fill a graduated container with enough water to completely submerge the spoon.Record the water level.Submerge the spoon in the water.Record the water level again.Subtract the 1st water level from the 2nd water level; the difference is the volume of the spoon.
One way to find the capacity of a teapot is to completely fill the teapot with water. Then, find the largest measuring cup you have. If the largest you have is a one cup measurer, then start filling up that cup and pooring out the water from the teapot into the cup. Once the cup is full, empty the water down the drain and keep a running tally of how many cups you are filling. Once you get to the end you will eventually have water that will not fill the cup completely. At this point you must use another measuring device, like a tablespoon and measure how many of those are remaining. You may have to estimate the last few drops of water.
Yes... First fill the 8 litre jug completely from the tap and then pour the contents into the 15 litre jug. Next fill the 8 litre jug completely from the tap and pour the contents into the 15 litre jug until it is full and you will be left with exactly 1 litre of water in the 8 litre jug.
33.5 cubic feet.
*
It would take 2500 m^3 (2500 cubic meters) of water. This is equal to 2,500,000 liters or about 660,430 US gallons.
More information is needed in order to answer this question. The size of the pond, preferably in square meters.
No, you should not use water in a deep fryer.
1000litres
42,000
If you fill it to four feet deep, the total is 10,408 gallons of water.
645divided by 21 equals 30.714. Hence, you can fill completely 30 such containers and 71.4% of the 31st container will be filled with water. Answer two If fill means completely fill, than you can fill 30 containers.
It would take 64 m3 of water, which is 64000 liters or about 16,907 gallons.
That will depend on how deep you want the water to be.
13300 gal of water can fill WHAT? 13,300 gallons of water will fill a 14'x28' pool that's 3 1/2' to 8 1/2' deep.
The volume of the pool is 36.4 cubic meters. There are 1000 liters in a cubic meter. You will need 36400 liters to fill the object.
A 28 meter square is 28 times 28 meters or 784 square meters. If it is one tenth of a meter (10 cm) deep, it has a volume of 78.4 cubic metersIf you mean 28 square meters (like a pool 4 meters by 7 meters) then the volume one tenth of a meter deep is 2.8 cubic meters.