this question is unanswerable without more information.
Are you referring to a 4" steel stud?
If so, it depends how closely the studs in the stud wall are spaced, how tall the studs are and if they have lateral bracing (and if so, how much/at what heights?).
You also need to state what gauge the steel is.
If you are referring to channel steel to be used as a beam/purlin/rafter - one would need to know the span and the thickness of the steel.
It depends on what the beam is made of.
a piece of yellow pine in an inside dry location can hold 1200 pounds per square inch and a 4" x 4" is really 3 1/2" X 3 1/2" or 12.25 square inches times 1200 is 16150 pounds
double a litre and you'll have your answer ?
depends what its made of
1 metre = 100 cm125 mm = 12.5 cmVolume of a cylinder = (pi) x (radius)2 x (length)Radius = 1/2 of diameter = 6.25 cmVolume = (pi) x (6.25)2 x (100) = 12,271.85 cm3 = 12.272 litres (rounded)
2 tonnes
it can hold up to 2 gallons
That depends... on the composition of the steel !
It depends on: 1. The section (box, I-beam, angle), 2. The cross-sectional dimensions, and 3. The width (span). More info is needed for a useful answer.
Livestock trailers will generally hold between 4 and 8 tons. Also, if they have 2 axles they can support more weight.
You need to specify the wall thickness in order to calculate the weight.
It depends on what the beam is made of.
72 units
122 grams
The steel superstructure will support one ton per lineal foot per roadway (northbound or southbound). The length of the steel superstructure is 19,243 feet. Each direction will, therefore, support 19,243 tons. The answer is 38,486 tons (2 x 19,243 tons). From http://www.mackinacbridge.org/faq-17/Facts/
it depends on the suspension and wheel clearance. it is commonly around 1-2 tons (2000-4000lb)
Some are: 1. Less Steel used...less cost. 2. Less Weight for a given design strength. 3. Less Weight for a given Length.