It may not be the iron that is the problem. It might be what else is on that same circuit that you plug the iron into. To check the problem out, unscrew the fuse and see what else on the circuit shuts off. If there are any loads that can be unplugged do so. Then try the iron again and see if the fuse blows. Try the iron in another plug from a different circuit, if a different fuse blows then its time to get a new iron.
there is a short somewhere in dash or heater, you need to fix that to stop fuses blowing
Faulty tail lights - causing a short.
short in the wiring behind your aftermarket radio
dont run it so hard dont run it so hard
how come my cigarette lighter keeps blowing fuses in my 2000 ranger
the fuse is F16 under bonnet fuse box, dont know why keeps blowing?
sounds like an electrical short. go to an auto electric shop for a proper diagnosis.
If your fuses continue to blow then you may have the wrong size in the fuse. You should double check to make sure you have the fuses in the right slot and that the voltage is correct.
Which fuse ... please be more specific. There are lots of fuses that can cause this.
dash light and back light on my Montero sport went out and keeps blowing fuses. why
check all brake bulbs a filiment may have shorted out
Fuel pump is defective and needs replacing.