IRON
Oxygen react with carbon, carbon dioxide is formed and this compound is released as a gas.
The most commonly used type of carbon steel is low-carbon steel. Such steels typically have less than 0.25 percent carbon content. We cannot be hardened by heat treatment (to form Martensitic) so cold practice typically accomplishes this. Carbon prepares will in general be moderately delicate and have low obstruction. By and by, they do have a high flexibility which makes them phenomenal for machining, welding, and ease.High-quality low-composite prepares (HSLA) are most here and there known as low-carbon prepares albeit certain segments, for example, copper, nickel, vanadium, and molybdenum, are regularly utilized. Such, in turn, constitute up to 10 per cent of the steel material. As the name implies, high-strength, low-alloy steels have higher strengths which are obtained by heat treatment. These still maintain ductility, rendering it quick to mold and Machin able to do so. HSLA is more corrosion prone than standard low carbon steels.The annealed composition of low carbon steel is ferrite and a limited volume of pearlite, with poor strength and stiffness, and strong plasticity and durability. The cold formability is therefore fine, and cold forming may be achieved using a process such as crimping, twisting, or pressing. High carbon steel with higher carbon content has weak strength and bad machinability, so machinability can be enhanced by normalizing treatment.Low carbon steel is usually not heat treated before using and typically rolls into steel edge, channel steel, I-beam, steel sheet, steel strip or steel plate to produce specific building materials, barrels, frames, furnace and farm machinery. Strong-quality low-carbon steel is formed into some kind of thin plate to produce deep-drawn products, such as car cabs and engine coverings; mechanical components of minimal strength requirements are often rolled into bars.For more information: Why is Low Carbon Steel Unresponsive to Work Hardening? - Pipingmart Blog
Cement paste is formed when cement is mixed with water. However, cement mortar is formed when cement is mixed with fine aggregate (sand) and water.The strength of cement mortar is more when compared to cement paste.Shrinkage will be less in cement mortar and high in cement paste.
Concrete is economical, easily formed, durable, has good strength under compression loading and can be finished in many aesthetically pleasing textures.
Cement paste is formed when cement is mixed with water.Cement mortar is formed when cement is mixed with fine aggregate (sand) and water.The strength of cement mortar is more when compared to cement paste.Shrinkage will be less in cement mortar and high in cement paste.
Carbon dioxide and carbon monoxide are both formed from carbon and oxygen.and im awsome
By knowledge
Conglomerate is a sedimentary rock formed of other large stones. It apparently has a hardness of 9 on the Hardness scale... 10 being diamond...
Diamond (C), Mohs hardness--10.
No. Diamond is the hardest natural mineral, measuring 10 on the Mohs scale of hardness. Wurtzite measures 3.5-4 on the same scale. Diamond is formed from carbon -- C; Wurtzite is formed from zinc iron sulfide -- ((Zn,Fe)S).
carbon dioxide
Diamonds formed from carbon in the lab, are diamonds formed from the mineral carbon.
By knowledge
By knowledge
By knowledge
lead oxide + carbon-> lead + carbon dioxide
carbon dioxide