Wf - Wi = a*t, where Wi and Wf are the initial and final angular velocities, respectively, a is the angular acceleration, and t is time.
So, a*t = 15.4 rad/s - 8.5 rad/s = 6.9 rad/s,
thus a = 6.9 rad/s / 5.2 s = 1.3 rad/s2.
Hhhh
To calculate velocity using acceleration, start by multiplying the acceleration by the change in time. For example, if the acceleration is 10 m/s2 and the change in time is 5 seconds, then there is a 50 m/s increase in velocity. Then, add the initial velocity to the increase in velocity.
Torque is equal to friction force (F) * radius (r). Torque is also equal to moment of inertia (I) * Angular acceleration (a). Angular acceleration is equal to rotational velocity * 2Pi/time, which is 2 seconds. So, F = IRa/r, or 45.63 Newtons
increase- your speed will increase until terminal velocity is reached. From there it will stay constant.
A car accelerates from a standstill to 60km/hr in 10.0 seconds what is its acceleration
Acceleration= distance / velocity squared
It was 6 radians per second. Angular acceleration = -3 radians per second2 Initial angular velocity = 6 radians per second. Final angular velocity = zero. Average angular velocity = 3 radians per second. Angular displacement in 2 seconds = 3 x 2 = 6 radians.
So acceleration is an increase of speed every second. The increase of speed was 9miles/sec and this was over 3 seconds. Therefore there was an acceleration of 3 miles/second every second i.e. 3m/s2
To calculate velocity using acceleration, start by multiplying the acceleration by the change in time. For example, if the acceleration is 10 m/s2 and the change in time is 5 seconds, then there is a 50 m/s increase in velocity. Then, add the initial velocity to the increase in velocity.
A time or an angular measurement.
vgvgvyhb
60 seconds, if measuring time or angular separation.
Torque is equal to friction force (F) * radius (r). Torque is also equal to moment of inertia (I) * Angular acceleration (a). Angular acceleration is equal to rotational velocity * 2Pi/time, which is 2 seconds. So, F = IRa/r, or 45.63 Newtons
You would use angular degrees or angular degrees plus minutes and seconds.
You cannot. Radians per second is a measure of angular speed whereas degrees are an angular measure.
velocity = acceleration x time 27 = acceleration x 10 acceleration = 2.7 m/sec/sec
increase- your speed will increase until terminal velocity is reached. From there it will stay constant.
A car accelerates from a standstill to 60km/hr in 10.0 seconds what is its acceleration