It hooks up to the vacuum ports on the carb or intake.
where does your PVC valve hose hook up to from the valve cover on a 6 l motor
The pcv valve should be in a rocker cover with a hose going to a constant-vacuum source such as the base of the carb of a port in the intake manifold.
The 2005 Chevrolet Up to land or PCV valve can be found near the back of the engine. The PCV valve will be behind the air cleaner housing.
A PCV valve is supposed to be hooked up to manifold vacuum. It isn't designed to vent.
yes replace the PCV valve it cheep ,,
Pull straight up on the PCV valve to remove it from the valve cover, then pull off the hose from the PCV valve, install the new one by doing the opposite of removal.
Pull upward on the hose that the PCV valve is in. The PCV valve will pull out of the hose. The PCV valve is located in the valve cover.
the pcv valve is on the back right of the valve cover if not get one
where is the pcv valve located 1994 nissan pick up 4wd 2.4l
The PCV valve on a Mazda 6 V6 is located on the valve cover near the back of the engine. The PCV valve is usually a plastic or metal part that looks like a small tube sticking up out of the valve cover.
Disconnect the PCV valve tube from the PCV valve.Disconnect the PCV valve electrical connector if it has one.Turn the PCV valve counterclockwise to remove from the valve cover.To install, reverse the removal procedure.
Remove the PCV valve retaining screws. Remove the PCV valve hose. Reverse the process to install the new PCV valve.