Maximum tolerance is the capacity to control one selves from any words or any acts against his person but not putting his life in eminent danger.
The teacher executed maximum tolerance toward her rowdy pupils.
The maximum allowable size that can be altered.
The minimum and maximum possible value is defined by the tolerance. To calculate the range of the resistor, simply add or remove the amount of the tolerance. For example, a 100Kohm resistor with 5% tolerance can range from 95Kohm through until 105Kohm. The lower the tolerance, the more accurate the resistor is.
70db to 85 db (decibel)
242 ohms INCLUDES initial tolerance assuming no thermal drift aging etc
A law stating that the abundance or distribution of an organism can be controlled by certain factors (e.g. the climatic, topographic, and biological requirements of plants and animals) where levels of these exceed the maximum or minimum limits of tolerance of that organism.
This depends on the tolerance rating of the resistor. There's 1, 2, 5, 10% tolerances. For tighter tolerances, you pay a premium - you can get tolerances as close as .1%. This is defined by one of the bands on the resistor. For a 10% tolerance, the maximum resistance of a 680 ohm resistor could be 748 ohms.
320 tolerance +/- 20 ? Did I get it right?
The maximum allowable tolerance is generally cited at 3MM, however most modern vehicles are at least 50% closer.
The raw steel specification A36, has a maximum tensile strength of 80 ksi. This is the same maximum strength as ASTM standards like A307 grade C or F1554 grade 36. I'm not familiar with any other specifications that would use A36 and have a higher maximum strength. The A36 steel would be out of tolerance if it exceeds a 80 ksi tensile. Being out of tolerance in this way could indicate other properties are also out of tolerance in a less favorable way. The steel would be less ductile, for instance, and impact properties might be reduced.
Acronym of TOLERANCE
This is designated as the organisms fitness.