1-0 or 1/0 actually means one zero and is thus pronounced "won aught". In the US, wire is sized per American Wire Gauge or AWG which gets larger as the gauge size gets smaller. 1 AWG wire is pretty big wire (about 1/4" in diameter). 1/0 or "0" AWG wire is a bit larger. By contrast, 4/0 (0000) AWG wire is about 1/2" in diameter). The larger the wire, the higher the current carrying capacity.
AWG, Ampere Rating, Some Uses
1, 130, Small House Service
0, 150, 40 HP Motor
0000, 230, Large House Service
10 is the gauge of the wire, 2 and 3 are how many leads are in the wire. For instance 10-2 wire is 10 gauge with two leads, 10-3 is 10 gauge with three leads.
150
There is a 10 hour difference between California and Egypt.
12 guage wire israted for 20 amps and 10 guage is rated for thirty amps! 12 gauge is what is required, as it is rated for 20 amps. 10 gauge is rated for 30 and will be more then enough. Oversizing wire in your case isn't necessary. The thicker 10 gauge wire is harder to work with and will more then likely cost more.
The larger the AWG number the smaller the wire. 10 AWG wire can carry more current than 12 AWG wire.The wire sizes of 24 and 26 are the smallest that are used in the electrical.See related links below
5
The difference between the greatest and least number is the range. For example, if the greatest # in a set of data is 20, and the least # is 10, 20-10=10. 10 is the range.
The difference between the greatest and least number is the range. For example, if the greatest # in a set of data is 20, and the least # is 10, 20-10=10. 10 is the range.
The difference between 1 and 10 is 9. or When you add a zero to the right side of the number 1 it becomes 10.
10 is a positive number, -15 is a negative number. Also... The difference is 25, -15 is 25 less than 10.
10 is the gauge of the wire, 2 and 3 are how many leads are in the wire. For instance 10-2 wire is 10 gauge with two leads, 10-3 is 10 gauge with three leads.
The first number indicates the size of the wires, in this case #10 AWG (American Wire Gauge). The last number refers to the quantity of conductors, excluding the ground wire, if any. 10-2 wire would have two conductors, typically a black used for the hot, and a white used for the neutral. If the label says "10-2 with ground" then the cable would also contain a bare or green insulated ground wire. 10-3 wire contains all the above plus one more wire, typically red, used for an additional hot.
The difference between the greatest and least number is the range. For example, if the greatest # in a set of data is 20, and the least # is 10, 20-10=10. 10 is the range.
The Difference of math is when you subtract 2 numbers and get the number between it. Example: 30 -20 _____ 10 The difference there would be 10.
If N is the number, it is [abs(10 - N)]/3
Your answer is 52. The reason for this is because the difference between 7 and 10 is 3. The difference between 10 and 16 is 6. The difference between 16 and 28 is 12. So the last one must be 28 +24 = 52
You can get the difference on your calculator, or in Excel. In Excel, the expression would be: = -10 - (-20) As to the "why", look at the numbers on a number line. That should help you visualize the situation.