Have you replaced the thermostat? The water in radiator should not be boiling! ------------------------------------------------------------------------------------------------------ Is your cooling fan/viscous clutch working ? (Helpfull)
If the temp gauge reads normal and the engine is not overheating, this is normal. The system is designed to hold 15-17 psi of pressure (whatever the radiator cap is set for). This pressure will make the hoses feel hard.
i just put in a new radiator and now temperature gauge reads high but their are no leaks
A clog in the radiator will do this.
If you are looking for the sensor that reads the coolant temperature, which the ecm uses to decide when to run the radiator fans. It is located near where the upper radiator hose hooks to the engine.
Yes, of course he does, and he reads them too!
The repair manual reads...7.8 to 13.2 qts.
Remove bottom hose from radiator. Remove radiator cap. When water stops running from hose - reconnect to radiator. Fill radiator with water/antifreeze Replace cap + run engine till temp guage reads 90 degrees. Let engine cool. Check fluid level + top up if ness.
Your pressure gauge may be broken....If it fluctuates, then you know its not your gauge, but if your gauge always reads 80, it may need to be replaced.
Yes everyone who reads it says its really good
He does, but he never reads fanmail or responds to it, so what is the use really.
Answerask her what if her mom reads her texts and its a private relation ship from our parents
Type your answer here... GO TO MENU, conveinece, oil life reset, hit ok when it reads set to 100 and hold ok!