As in a camera, this part is usually called an iris diaphragm. It can make the aperture bigger to let in more light, or smaller to make the image sharper. The shutter in a camera is not the same thing.
nothing
A shutter is a device that shuts. In a camera, it's the device that opens for a period of time, usually very short, to allow light to pass through the aperture, and then shuts. An aperture is an opening. In a camera, it's the opening in the camera's body, usually where a lens and shutter are mounted, where the light enters on its way to whatever is going to capture the image.
Sure, but don't open the shutter or you'll ruin it.
9-2-09 It is reported today that they will
You can go to sites like southernhurricanshutters.com. They offer products and information about hurricane shutters.
It is almost completely transparent when the Tranquility Wooden Shutter room divider when it is adjusted to let light come through.
Aperture priority lets you set the aperture you want and the camera sets the shutter speed for you. You use it when you want to control depth of field. Shutter priority lets you set the shutter speed you want and the camera sets the aperture for you. You use it when you want to control how motion is rendered in the photograph. Program mode sets both shutter speed and aperture for you. Use it when you are not concerned with aperture or shutter speed control.
light
The Shutter and the Aperture are the two controls the Shutter is used to control how long the Film is exposed for and Aperture is used to control how much light is let in
Shutter priority.
The shutter release is usually known as a mechanical cable (similar to a brake cable you would find on a bicycle) that is connected to a shutter and then used to actuate (open and close) a mechanical shutter. In a more contemporary application, shutter releases can be hand held push button switches or foot switches that can be used to control the electronic pulse that would be used to actuate an electro-mechanical shutter.
shutter speed and lens aperture
Diaphragm in microscope is kind of shutter which can be used to adjust the ammount of light intensity.It is just above the condensor which is known as Abbe condensor that collects the light directing it upward through any object on the stage.
Diaphragm in microscope is kind of shutter which can be used to adjust the ammount of light intensity. It is prresent just above the condensor which is known as Abbe condensor that collects the light directing it upward through any object on the stage.
Diaphragm in microscope is kind of shutter which can be used to adjust the ammount of light intensity. It is prresent just above the condensor which is known as Abbe condensor that collects the light directing it upward through any object on the stage.
The Shutter Speed. If the shutter speed is positioned at 2000 you'll have a very quick exposure, this is best used if its very bright outside. If the shutter speed is at 75, you'll have a very long exposure, best used if its cloudy or dark.
Equipped on the Condenser of the microscope, the iris diaphragm is a shutter controlled by a lever that is used to regulate the amount of light entering the lens system.