A # 10 copper wire with insulation factors of 60, 75 and 90 C is rated at 30 amps.
<<>>
usually in home wiring for dryers could be #10 for short distances however, voltage drop over longer runs you may want to use m#8 stranded. Remember electricity attack it's weakest point. You do not want your wire in wall to be weakest point
You use the correct size breaker depending on the size wire in the circuit. If the circuit is wired with AWG #12 wire use a 20 amp breaker. If it is wired with AWG #14 wire then use a 15 amp breaker.
Depends on how many amps it pulls and the size of the wire in the circuit.
The size breaker you use is determined by the size wire used in the circuit. If you use AWG #12/2 wire then use a 20 amp breaker. If you use AWG # 14/2 then use a 15 amp breaker.
12 AWG.
Don't use aluminum wire inside the house.
NEC states that all GFCI's require a 20 amp circuit, the wire size for a 20 amp circuit is 12 gauge.
The correct size fuse needed is based on the size wire used in the circuit. The size wire needed is based on the load that will be applied to the circuit. 1. AWG 14/2 wire = 15 amp fuse 2. AWG 12/2 wire = 20 amp fuse 3. AWG 10/2 wire = 30 amp fuse 4. AWG 8/2 wire = 40 amp fuse
AWG #4 copper.
Use 8 gauge wire.
A 15 amp circuit breaker is used to protect a # 14 copper wire which is the minimum size wire that can be connected to a 15 amp receptacle.
# 3 gauge
8 AWG copper.