Although it is advisable to check your manufacturer specifications, there are heat pumps available for above ground pools. You should expect to pay about $2,000.00 (+/-) for the unit itself plus any installations costs.
Decide how warm you want your pool water to be. Most people prefer a temperature in the high 70s or low 80s (Fahrenheit), but your individual taste may vary.
Determine the average temperature during the coldest month you wish to use the pool. You can usually do a quick estimation based on your own experiences, but if you want formal numbers, check the National Weather Service for average temperatures in your area.
Subtract the ideal temperature of the pool water from the average outside monthly temperature. The result is the number of degrees Fahrenheit your heater will need to warm the pool in order to make it comfortable.
Calculate the surface area of your pool. If you have a rectangular pool, this is easy: simply multiply the pool's length by its width. If your pool has a more unusual shape, apply the formula provided at PoolBright.com (see Resources, below).
Multiply the surface area from Step 4 by the required elevation in pool temperature from Step 3. Then multiply the results by 11. That figure is the number of British Thermal Units per hour (btu/hr.) your heater will need to produce in order to adequately heat your pool.
A heat pump can be used all year round. They extract heat from the air even in cold weather.
In simplest terms, an above ground pool pump is a flooded suction pump, which means the water level must be higher than the pump for it to operate, and an inground pump has the ability to draw water up from a level lower than the pump. The engineering and structure of these two different types of pumps is what makes them work the way they do. This means that, in a typical installation, you could use an inground-specific pump on an above ground pool, but not an above ground pump on an inground pool with the water level below the pump.
Generally...no. In simplest terms, an above ground pool pump is a flooded suction pump, which means the water level must be higher than the pump for it to operate, and an inground pump has the ability to draw water up from a level lower than the pump. The engineering and structure of these two different types of pumps is what makes them work the way they do. This means that, in a typical installation, you could use an inground-specific pump on an above ground pool, but not an above ground pump on an inground pool with the water level below the pump.
In simplest terms, an above ground pool pump is a flooded suction pump, which means the water level must be higher than the pump for it to operate, and an inground pump has the ability to draw water up from a level lower than the pump. The engineering and structure of these two different types of pumps is what makes them work the way they do. This means that, in a typical installation, you could use an inground-specific pump on an above ground pool, but not an above ground pump on an inground pool with the water level below the pump.
The size of a heat pump that you can use for a pool which is 18 feet wide by 33 feet long and has a depth of 4.5 feet can vary depending on specific brand of heat pump you wish to purchase. The minimum size of heat pump for an above ground pool of this size in 102,000 BTU.
To winterize your inground swimming pool, first backwash the filter, and then disconnect the pump. Purchase winterizing chemicals for the pool water, and be sure to use a pool cover.
It would be recommended to observe the pump size rating (horsepower) and replace with a swimming pool pump that has a similar flow curve. In terms of brand name, there is no reason that you need to use the existing brand again unless you want to.
use something called soda ash you can find it at a pool or spa store
Try searching Pentair Pool Products. k
with the use of skilled professionals to dive the pool and pressure test the lines
Heat pump pool heaters use electricity to capture heat. As the pool pump circulates the water, it is drawn from the pool and through a filter and into the heat pump heater. The heater itself has a fan that pulls in outside air and pushes it over the evaporator coil. At this point liquid refrigerant in the evaporator coil absorbs the heat from the outside air converting it into a gas. The gas is then passed through the compressor where it increases the heat. This very hot gas is then sent through the condenser where the hot gas is transferred to the cool pool water circulating through the heater. The heated water is then returned to the pool. A pool heater on the other hand uses the gas directly to heat the water by fueling the combustion chamber.
yes you can, the sand pump cleans the pool, making it look amazing!!
I would say 10 yards easy. if the ground is flat.. if the pump is lower that the pool ? it may take a bigger pump ..use pvc. and never use tread tape on a plastic pump ! your pool pump repair guy in longwood fl.