I've just cleaned the EGR valve on my 1999 Sebring Convertible. The EGR valve is over by the battery. Look from the front for something that resembles a thermostat.
Old Answer
I have a 98 lxi V6. I believe the 3.0 liter is layed out in the same fashion. If it is, the valve is attached to the back of the intake plenum(the big silver thing that looks like 6 tubes stuck together) between the plenum and the firewall. Go to an autoparts store and buy a manual for the sebring. The directions are in there. That is how I did it. Hope this helps.
Start and stall out, possibly. Not start at all, not likely.
EGI.. do you mean EGR?
It's behind the manifold on the driver side
on a 2.5l it is mounted on the intake plennum in the back against the firewall
The EGR valve is mounted on the rear of the engine. It is connected to two pipes, just above the bell housing.
You need to take the intake manifold off and radiator
Plugged egr tube or a failed egr valve.
see link for pic of a Chrysler egr valve.
The egr valve on a Chrysler Pacifica is on the front of the engine. It is near the top, behind the water pump.
where do I find the egr valve on a 1999 Chevy Cavalier?
It does not have EGR.
A 1999 Dakota does not have EGR.