answersLogoWhite

0


Best Answer

It doesn't. Weather does not affect a breaker. But if the breaker is tripping, somewhere

the moisture from the cold could be affecting a household outlet or light fixture, because

of it leaking into a wall or area. Rare, usually it would short out somewhere and not keep happening. You trace all the outlets and lights that could be on this breaker and check everyone for lose wire or bad fixture or outlet. You also check current draw, the circuit could be getting overloaded, I have seen some really bad wiring in houses where it was against codes.

You need to have someone also check your main panel for water, I have seen water enter the meter and follow the wire into the panel like a straw, and rust the bus bars

and breaker causing a trip.

The cover must be removed, and this is the most dangerous place, so I am saying,

do not do it yourself.

Have someone that really knows electric, or call an electrician to check it.

Electricity is dangerous, and should not be done by a home improver.

Good luck with your problem.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Why does circuit breaker trips in cold weather?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Alaskan tourist board?

i live in uk , but trying to establish whetherthere are trips to Alaska in the winter. I am looking for cold isolated weather?


Does the neutral wire have a charge in a gfci circuit breaker?

No. Not if the GFCI is wired correctly. The neutral wire should always be cold, or at ground potential.


Why does the fuse box in my house make a clicking noise when the heater clicks on?

The clicking noise you are hearing could be the heater is overloading the breaker and it is on the verge of tripping This could be caused by the heater being to large for the circuit. Check the amperage rating on the heater and the rating on the breaker It also cold be the circuit breaker is going bad and needs to be replaced by a qualified electrician These are 2 possible answers you also could have a bad (loose) electrical connection some where in the circuit


What causes a 1994 Chevy Lumnia to stop running on long and short trips in hot or cold weather and then start again after two or more hours?

Ba cam sensor?


What is Uranus weather?

Uranus's weather is cold


Is it better to get the cold in hot or cold weather?

Hot weather


Do you experience cold weather?

Yes, you experience or feel cold weather


Can a chihuahua survive cold weather?

Yes they can survive in cold weather.


Can salamander die in cold or hot weather?

Hot Weather.


How do you protect from cold and flu?

from not going in out in cold weather and not drinking cold drinks from not going in out in cold weather and not drinking cold drinks


Do farts stink more in hot weather or cold weather?

your farts stink more in cold weather, because cold weather makes things stink more.


Why have I always been told not to load up an electrical circuit or equipment more than 80 percent and where is this stated?

The 80% ideal is from the NEC. Let's say you have a standard 15A circuit. This circuit is rated to carry a maximum of 15A, no more. If you try to draw more than 15A, the breaker will pop. Now, you can put 15A worth of appliances on this circuit, but then you are running it at its maximum all the time. If you add anything else to this circuit, you will pop the breaker. If you have something that draws surge current, it can opo the breaker under normal use. You have no "wiggle room" when you load it at its maximum. Also, as touched on above, if you run your circuit at the maximum you cannot add anything else. This is generally a sign that you need to upgrade your wiring. Furthermore, the breaker can handle 15A indefinitly under standard test conditions, which are close to ideal. Your breaker box may not be ideal. Breakers are thermal devices, so self heating and heating from other breakers can be a problem. If your breaker is hot, it will pop sooner than if it is cold. The more current that flows through it, the hotter it will get. If you are overloading circuits the easiest thing to do is to break the circuit up into multiple circuits. The exact implementation will depend on the situation.