While plastic is usually considered an "artificial" material, it is typically a polymer based on organic petrochemical compounds. Polymers can be described as large molecules made up of simple repeating units. The word polymer is derived from the Greek words poly meaning "many" and mer meaning "part". Many types of polymers can be created by varying the molecular composition of the repeating unit.
Being organically-based, polymers are therefore subject to degradation and breakdown through natural oxidisation. Degradation may be initiated or accelerated by numerous factors including ultraviolet light, visible light, ozone, pollutants, manufacturing impurities, oxygen, and heat. During degradation, oxidisation can result in the breaking and rearranging of chemical bonds along the polymer chain. This can begin even during the manufacturing process, due to the conditions of extreme heat or pressure that may be used to form the polymer.
To delay the onset of degradation as long as possible, both process stabilisers and long-term stabilisers are added to the polymer. The most important primary anti-oxidants used for long-term stabilisation are the sterically hindered phenols. Unfortunately, these exhibit an undesirable side effect when exposed to ultraviolet radiation. They develop deeply coloured molecular structures resulting in irreversible yellowing of the plastic. To minimise this effect, polymers are also provided with an ultra-violet stabilisation package. This package is often made up of ultraviolet absorbers (UVA) and hindered amine light stabilisers (HALS).
UVAs protect physically through molecular absorption of the high-energy fractions of sunlight. The absorption transforms the molecule into an excited state, and when it collapses back to its original state, the absorbed energy is released as a thermal emission (heat).
In contrast, HALS protect chemically by combining with oxygen when exposed to sunlight to form stable nitroxide radicals. These trap the oxidising free radicals released when the polymer is exposed to ultraviolet radiation.
Eventually, the stabilisers are either consumed or migrate to the surface of the polymer where they are abraded away. The polymer has then lost its protection and deterioration proceeds rapidly when exposed to the factors mentioned above.
In theory, after-market protectorant products provide a coating to replace or supplement the original UVAs or HALS in the polymer. They cannot, however, reverse any yellowing which is the result of degradation of the sterically hindered phenols within the polymer itself.
Oil based paints now have alkyd rather than linseed oil but this is still a yellow liquid. The Alkyd is mixed with the pigment to make the paint but from the day it is applied the separation begins and the familiar yellowing begins.
Water based paints do not contain alkyd or any other oil so they are non yellowing and are therefore a better choice for interiors. Water based paint is not quite as durable on exterior surfaces, though it is more flexible.
Roger Bisby@selfbuilder.net
Yes, some white gold can definitely turn slightly yellow. In fact, "white" gold alloys (gold with nickel, for example) may be plated with rhodium to obtain the shiny appearance. If the alloy underneath has a higher gold content, then it is possible that when the plating wears through you will see gold color. However, true high quality white gold should still remain white, no matter how old it is.
this has to do with the frequency of light the zinc sends out and reflects. Just as iron turns red and when very hot white zinc turns yellow. In a old light bulb a wire of wolfram is used to create yellow light. So the light that it sends and reflects is a material property
The term "gold" comes from the Old English word "geolu," which means yellow. Gold is named after its distinct yellow color and has been used by humans for thousands of years due to its rarity and beauty.
to make coal in to colored crystals you will need: aadult helper: measuring spoon: liquid blue laundry detergent: table salt: a small bottle of ammonia; a small jar: plastic spoon or old table spoon: 8 to 10 charcoal briquettes.!!!!!!!!! have fun!!!!!!!!!
The name "gold" comes from the Old English word "geolu," which means yellow. This is because gold has a distinct yellow color.
THE ANSWER IS NO NO NO NO NO NO NEVER NO (Walter White)
white, like people when they get old... they turn white
an old grannyish tanish yellow hah
Yes, some white gold can definitely turn slightly yellow. In fact, "white" gold alloys (gold with nickel, for example) may be plated with rhodium to obtain the shiny appearance. If the alloy underneath has a higher gold content, then it is possible that when the plating wears through you will see gold color. However, true high quality white gold should still remain white, no matter how old it is.
its getting old
Old gold and white.
Paper made from wood pulp will turn yellow with age. However it is much cheaper than paper made with cotton fibers. The paper oxidizes.
The same age as to be a white soldier, or a green one or a yellow one etc.
It can be as old as 10 billion years. Then it increases to the size of a giant and supernova. After that it turns into a small dense white dwarf.
They start getting feathers @ 3 weeks old
Yellow was the old color and pink is the new color nose of hello kitty.
Try white vinegar, or WD40, or lemon juice, or sunscreen.