answersLogoWhite

0


Best Answer

Could be as simple as a burnt out fuse or as complicated as something wrong with your car's computer or electrical system. I would recommend going to an auto parts store first and ask them to help you find the proper fuses for your tail lights, and if that isn't the solution ask them what you should try next or a reference to an honest auto repair shop. Good luck!

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Why don't brake light and blinkers don't work but your 3 rd brake light does?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Where is the sensor on the brake pedal I have no brake lights but the blinkers work and all fuses are good?

brake light switch is above the brake pedal under the dash


Why will the blinkers on an 81 K-10 pickup work but the brake lights will not?

Check the bulbs. These bulbs are a combination tail light & brake light. Even though the blinkers work, the brake light part might be burnt out. If these are okay, check the brake light switch. It's mounted on the brake pedal. Are the brake lights on all the time or they don't light up at all? if all the bulbs are fine, its more than likely the stop-light switch underneath the brake pedal.


Your brake lights and head lights do not work your blinkers and running lights do?

My rear window brake light works, but not my tail light brakes on my 1997 Monte Carlo. What is the problem?


Mazda 626 brake light?

brake lights dont work


2001 ford explorer sport trac and the rear blinkers dont work and the third brake light doesn't work what is my problem?

coroded battery posts, a fault in the wiring, a ground not connected, ennie meenie miney moe...


Brake lights dont work How do i fix them?

Check the fuse, the bulbs, and the brake light switch.


Your blinkers interior lights and brake light does not work Is it a fuse?

IT COLUD BE A RELAY BOX multi function switch( turn signal, lites ect.)


Why would your blinkers not work after the brake pads were changed?

it may have nothing to do with your brake pads on my car the blinkers stoped working they still came on but they stoped blinking and i just had to repace the bulbs


1985 bronco brake lights dont work but all other lights do work you replaced brake light switch and bulbs?

Check the brake light fuse. If you have 12 volts at the brake light switch I would suspect the signal light switch is at fault.


Where is brake light switch on 92 Lumina Z34?

Above the brake pedal. If your main brake lights dont work but your third center brake light does, then the brake light switch is not the problem. Its is the turn signal switch.


You need to know if there is a relay for the brake and blinkers for a 92 s-10 blazer my blinkers and brake lights dont work?

I am currently having the same problem you are having check the fuse to see if it is blown the blinkers and brake lights are on the same fuse my system has a short in it somewhere and is popping the fuses I am in the process of running new wires since the wonderful people at Chevy ran all the wires thru the frame and you can't access them


Your brake lights work sometimes and blinkers dont work at all and you checked fues and bulbs and put in a new flasher what else can you check its a 1993 oldsmoble achevia?

It could be a loose connection, faulty turn signal switch or possibly even bad tail light sockets.