Each color means a different thing and there are green ones, they are just not as common
There should be a bare wire along with the red, black and green wires in the ceiling. It is possible that it was cut off short or tied up to the box somewhere. this is the same as the green wire.
Normally red or black is the hot wire and green is the ground. However someone may have used the green wire as the neutral wire which is normally white. Just connect the black wire from the light to the red wire and the white wire from the light to the green wire and see if it works. If not you have to pull the wires out of the ceiling box and see how they wired it.
Black to Black - Black from the ceiling is a hot wire and should be switched Red to Blue - Red wire is another hot wire and should also be switched White to White - White from the ceiling is the neutral and should not be switched. Your wall should have two switches, one will control the red wire, one will control the black wire. If you wire your fan as above, one switch will turn the fan on, the other will turn the light of the fan on.
Assuming the ceiling fan also has lights then that is what the second lead is for. You can tie the black & blue together and attach them to black lead in the lighting box. The light and fan will come on together when you flip the light switch and you have to use the pull chain on it for control. ALWAYS connect the green ground wire to the house wiring ground. This is a SERIOUS safety and fire hazard issue if you do not.
More information is needed as to what device you are connecting to what power supply. The only two identifiable wires are the white and green. In North America the white colour is used for the circuit's neutral and the green is used for grounding of devices.
Black wire goes to (line) which is 110v comming in to ceiling box from light switch. It will connect to either black or red, which ever they ran. White is neutral and connects to white in box. Blue is for the light kit if you are using one. You may also connect it to the black if you just use the chain to turn on light.
Normally red or black is the hot wire and green is the ground. However someone may have used the green wire as the neutral wire which is normally white. Just connect the black wire from the light to the red wire and the white wire from the light to the green wire and see if it works. If not you have to pull the wires out of the ceiling box and see how they wired it.
Yes.
No. It is made in only black and white
Black to Black - Black from the ceiling is a hot wire and should be switched Red to Blue - Red wire is another hot wire and should also be switched White to White - White from the ceiling is the neutral and should not be switched. Your wall should have two switches, one will control the red wire, one will control the black wire. If you wire your fan as above, one switch will turn the fan on, the other will turn the light of the fan on.
Its Darkus ventus only has either green and light blue or green and white
no the only colors on the jamaican flag are black,yellow and green
More information is needed as to what device you are connecting to what power supply. The only two identifiable wires are the white and green. In North America the white colour is used for the circuit's neutral and the green is used for grounding of devices.
More information is needed as to what device you are connecting to what power supply. The only two identifiable wires are the white and green. In North America the white colour is used for the circuit's neutral and the green is used for grounding of devices.
Assuming the ceiling fan also has lights then that is what the second lead is for. You can tie the black & blue together and attach them to black lead in the lighting box. The light and fan will come on together when you flip the light switch and you have to use the pull chain on it for control. ALWAYS connect the green ground wire to the house wiring ground. This is a SERIOUS safety and fire hazard issue if you do not.
This sounds like a ceiling fan that also has a light attached to it. The black and white wires are used for the incoming supply voltage. The green is the ground wire. The blue wire is most likely the wire that goes to the lamp portion of the ceiling fan. The black and blue wires are separated from each other in the fixture so that the fan motor and the light can be independently switched. In these types of installations a three wire cable is strung from the fan switch box to the fixture box.For independent switching, the junction box should be a two gang box. From the power source in the switch box, the white wires all connect together. The incoming black connects to the top of the two switches in the two gang box. Bottom of the first switch to the black in the three wire cable, Bottom of the second switch to the red wire of the three wire cable.At the fixture junction box, incoming white wire to the fan white wire. Incoming black wire to the fan black wire and incoming red wire to the fan blue wire. If wired this way the light and fan motor can be individually switched on and off.If there is only one switch box, at the fan junction point connect the black and blue wires together to the incoming black wire. White to white wires together and green wire to the ceiling junction boxes ground terminal. In this configuration the switch will turn on both the fan and light at the same time.
No they can not. The only colors they can see is Red, Black, and White!
More information is needed as to what device you are connecting to what power supply. The only two identifiable wires are the white and green. In North America the white colour is used for the circuit's neutral and the green is used for grounding of devices.