Why your dish network remote is not controlling your television on and off or volume but is controlling the satellite?

already exists.

Would you like to merge this question into it?

already exists as an alternate of this question.

Would you like to make it the primary and merge this question into it?

exists and is an alternate of .

It has probably not been programmed for the particular make and model of TV. Consult the directions.
2 people found this useful

How can you program your dish network remote to your tv?

Programming Device Codes The Dish Network remote can be programmedto control up to 4 devices: SAT Mode: Satellite receiver TV Mode:Television VCR Mode: VCR AUX Mode: Amplifier, Receiver, second TV,second VCR> How do I program my remote control? For remotes that have blue arrow and Select buttons (MORE)

How do you program samsung remote to control dish network?

First turn on the Dish network receiver, then press and hold themode button on the receiver until all mode buttons light up. Nextrelease the mode button, and the mode button will flash. Enter theSamsung code and press the pound button. Press the power button totest. If the TV and receiver does not t (MORE)

Is there any way to program a Samsung television remote control to operate the dish network?

Some universal remotes can be programmed to work on the DISH receiver but you won't be able to use your Samsung TV remote to operate your DISH receiver. You can program your DISH remote to work your Samsung TV. I have provided instructions on how to program your DISH remote to your TV. I have also p (MORE)

What is the dish network remote control code for a apex?

I have provided the codes to program your DISH remote to your Apex TV. The codes are: 757, 744, 595, 118, 743, 618 Instructions for programming your remote to your TV. Remotes: Basic (Television Only) . Turn the Television On. . Press and hold the TV Power button for three seconds until the (MORE)

How do you fix the volume button on the dish network remote control?

How to fix "all" buttons on the remote control is easy. Here is what you will need: A small flat screw driver (type to unscrew tiny screws), a pair of scissors, tweezers, superglue, and an old remote control. 1) Use the screw driver to pry apart the remote control and open it. 2) Pull off the plast (MORE)

Why can't i change channels with dish network remote control?

Do you have fresh batteries in the remote? Even though the buttons at the top of the remote may light up, the batteries may not be strong enough to get the signal to the receiver to complete the operation. If you do have fresh batteries, you may need to readdress the remote to the receiver. I have p (MORE)

How do you prograre your dish network controller to my Orion tv?

To program your DISH Network remote to your Orion TV you will simply- press and hold the TV Mode button on your DISH Network remote, until all the other mode button back lights illuminate, then release. -Now while the TV mode button is blinking enter in the remote code; 720 which is the remote co (MORE)

What is dish network remote control code for Sony ps3?

We don't have a code for the Play Station. You would need to contact Sony to get a code from them. I have provided the power scan instructions to attempt to locate a code on the remote. Address To Other Equipment Using Power Scan . Remote: All Remotes (except Basic) . With the desired equipme (MORE)

What is the dish network remote code for a brookstone remote control?

You can program your DISH remote to work on your TV and other electronic components but unless you have codes or instructions on how to a universal remote to the receiver, we don't have codes specifically to operate in that manner. I would contact the manufacturer of your remote.

What is the gyration remote control code for dish network dvr?

You can program your DISH remote to work on other electronic equipment. The gyration remote should have instructions on how to program it to other components. If you don't have the instructions, I would give the company a call to try and get the instructions.

How do you get your dish network remote to turn satellite on and off?

When you press the large red button at the top of the remote, this button turns the satellite receiver off/on. If it doesn't work for you, try changing the batteries. If it still doesn't work, you may need to readdress the remote to the receiver. I have provided the instructions below: Remote: Al (MORE)

What is remote control code for dish network REMOTE?

If you are asking for the code to program the remote to your TV, we need to know the TV brand. If your remote in not operating the receiver, you can readdress the remote to the receiver. I have provided instructions on how to readdress the remote. You might replace the batteries just to make the (MORE)

What are the dish network remote control codes for a Westinghouse 40 TV?

I have provided the codes for your Westinghouse TV and instructions on how to program the remote to your TV. TV codes: 500, 719, 659, 672, 674, 665, and 670 Remotes: Basic (Television Only) . Turn the Television On. . Press and hold the clear TV button for three seconds until the LED flashes. . (MORE)

What is dish network code for auvio remote control?

We don't have codes available for the auvio remote yet. I have provided instructions on how you can perform a power scan for the code on your DISH remote. If this doesn't work, I would contact auvio to see if they have a code for you. Address To Other Equipment Using Power Scan . Remote: All Re (MORE)

What are the codes for a seiki tv for dish network remote control?

I don't show a code yet for that brand of TV, however, you can perform a power scan to see if you can find a code on the remote that will work. I have provided the power scan instructions. Remote: Basic Remote (Television Only) . Turn the Television On. . Press and hold the clear TV button for (MORE)

What is the dish network control code for a sharp tv?

I have provided the TV codes for your DISH remote to program to your Sharp TV. I have also provided instructions on how to program the remote to your TV. Remote codes: 741, 739, 629, 628, 526, 521, 740, 669, and 608. (Try first code, if it doesn't work try the next). . Remotes: Basic (Televis (MORE)

What are the dish network codes for sharp aquos remote control?

You can't use the Sharp remote on the Dish receiver but you can program the DISH remote to the Sharp TV. The codes for the Sharp TV are: 741, 739, 521, 629, 526, 628, 740, 669, 670, 607, and 608. I have also provided the instructions on how to program the remote to your TV. Remotes: Basic (Tel (MORE)

How do you prograre your dish network controller to my gfm plasma tv?

I have provided instructions on how to program your remote to your TV. You did not indicate the model remote or receiver you have. We don't have a code for your brand of TV but you can perform a power scan for a code in the remote. Address To Other Equipment Using Power Scan . Remote: All Remot (MORE)

What steps do you go through to code a dish remote control to turn on and off a Sanyo tv?

I have provided the remote codes for your Sanyo TV and instructions on how to address the remote to your TV Remote codes for Sanyo TV: 590, 683, 589, 090, 591, 111, 652, 542, 987, or 692. Address remote to TV: Remotes: Basic (Television Only) . Turn the Television On. . Press and hold th (MORE)

What is the dish network remote control code for a 37 Westinghouse LCD television?

I have provided the TV remote codes and instructions on how to program your DISH remote to your Westinghouse TV. Remote codes: 500, 719, 659, 670, 672, 674, or 664. . Remotes: Basic (Television Only) . Turn the Television On. . Press and hold the clear TV button for three seconds until the (MORE)

What are the codes for programming a silo tv on a dish network remote control?

We don't have remote codes for the Silo TV so I have provided the instructions for performing a power scan to program the remote to your TV. . Remote: Basic Remote (Television Only) . Turn the Television On. . Press and hold the TV Power button for three seconds until the LED flashes. . Pres (MORE)

How do you set a Dish remote control to work on your tv?

Your TV brand has codes that correspond to that model. We use one of these codes to operate your TV. Without knowing your TV brand, I'm not able to provide the codes but I can provide you the instructions for programming the remote to your tV. . Remotes: Basic (Television Only) . Turn the Tele (MORE)

How do you set your dish remote control to work on a Sanyo tv?

I have provided the TV codes for your Sanyo TV and the instructions on how to program the remote to your TV. Codes: 590, 789, 683,589, 090, or 591. . Remotes: Basic (Television Only) . Turn the Television On. . Press and hold the clear TV button for three seconds until the LED flashes. . (MORE)

How do you get volume control on a remote with dish network?

Depending upon the model TV you have, some models have several codes associated with them where some codes only give partial functionality. Some TV brands do not give full functionality. Without knowing your TV brand, I can't provide the codes. I have provided instructions on how to perform a power (MORE)

How do you control a GE TV with a dish network controller?

I have provided the codes for your GE TV and instructions on how to program the remote to your TV. Codes: 645, 742, 531, 763, 676, 690, 691, or 698. . Remotes: Basic (Television Only) . Turn the Television On. . Press and hold the clear TV button for three seconds until the LED flashes. . (MORE)

How do you turn off volume on a dish network remote?

There are two ways to get turn off the volume with a DISH remote. The remote would need to be addressed to the TV itself. You can press the 'Mute' button which is generally on the top left hand side of the remote, and you can press the volume down button to make it quieter.

How do you program a dish network remote to control the on and of and volume on a polaroid tv?

Programming a remote to a polaroid TV is much the same as any other equipment. I have listed the steps below for you! Addressing Remote to TV: 1.) Press and hold the clear TV button until all mode lights light up. 2.) Release and TV light will be blinking. 3.) Enter code and press #. The T (MORE)

How do you program Dish Network remote to control LG TV?

I have listed below some steps to program the remote to your TV. Keep in mind the remotes are not guaranteed to work all types of equipment. Addressing Remote to TV: 1.) Press and hold the clear TV button until all mode lights light up. 2.) Release and TV light will be blinking. 3.) Enter (MORE)

What is the dish remote control for an lg 42lk520 tv?

Here are the top 3 codes for your LG TV: 627, 520, or 678. I have also provided instructions on how to program your Dish remote to your TV. Address Remote to TV/Other Devices . While at the device location (TV, etc), point the remote at the device. Press and hold the device button on the remot (MORE)

How do you program dish network control remote to daewoo tv?

Here are the codes for your Daewood TV: 531, 719, 727, 524, 663, or 665. I have also provided the instructions on how to program your Dish remote to your TV. Address Remote to TV/Other Devices . While at the device location (TV, etc), point the remote at the device. Press and hold the device b (MORE)

What are the codes for an APEX tv for dish network remote control?

Here are the codes for APEX TVs: 757, 744, 595, 118, 743, 618, or 005. Here are the instructions for programming the remote to you TV: Address Remote to TV/Other Devices . While at the device location (TV, etc), point the remote at the device. Press and hold the device button on the remote (MORE)

How do you program dish network remote to control samsung tv?

Programming a remote is an easy process. I have listed the steps below! These steps will work with any TV. Addressing Remote to TV: 1.) Press and hold the clear TV button until all mode lights light up. 2.) Release and TV light will be blinking. 3.) Enter code and press #. The TV button sh (MORE)

What are the TV codes for Dish Network remote?

The codes for a DISH remote vary on the model of TV you have. To get the most accurate codes, visit the related link below. Enter your remote, then select the type of equipment, and select the brand. A list will generate showing the codes that are available!

What is the problem when you can program the Dish remote to control the volume and TV power but not the Dish receiver is this a remote receiver or TV related problem?

The remote can work both pieces of equipment. If the remote will not work the receiver, then the remote itself could be the issue. If the remote is not controlling the receiver, press the SAT button and make sure it lights up. If it does, try the functions again. If still nothing, access the Syst (MORE)

What are the dish network remote control codes for a venturer tv model plv76198e?

There are not currently any codes for that model of TV available. Iwould recommend using the power scan function to try and scan thecode into the remote. I have listed the steps below for you! 1.) With the TV on, press and hold the TV button (about sixseconds) on top of the remote until all mode bu (MORE)