Share on Facebook Share on Twitter Email
Answers.com

Arbitrated loop

 

A ring topology used in Fibre Channel. Up to 127 devices may be attached in the loop, but only two can communicate at the same time, reflecting the channel nature of Fibre Channel technology. To communicate with a device several hops down the ring, each device repeats the data to its adjacent node. See Fibre Channel.

Arbitrated Loop
This ring topology is widely used and can connect up to 127 nodes without using a switch. All devices share the bandwidth, and only two can communicate with each other at the same time, with each node repeating the data to its adjacent node. TX means transmit, and RX means receive.

Download Computer Desktop Encyclopedia to your iPhone/iTouch

Search unanswered questions...
Enter a question here...
Search: All sources Community Q&A Reference topics
Wikipedia: Arbitrated loop
Top

Arbitrated loop, also known as FC-AL, is a Fibre Channel topology in which devices are connected in a one-way loop fashion in a ring topology. Historically it was a lower-cost alternative to a fabric topology. It allowed connection of many servers and computer storage devices without using then very costly Fibre Channel switches. As of 2007 the cost of the switches dropped considerably, so FC-AL is rarely used for a server-to-storage communication. It is however still commonly utilized on backend of some disk array controllers.

  • It is a serial architecture that is compatible with SCSI, handling up to 127 ports (devices). One port may optionally connect a loop to fabric switch port.
  • The bandwidth on the loop is shared among all ports.
  • More than 2 ports on the loop can communicate at the same time (there is no concept of a "token").
  • Arbitrated loop with only 2 ports is a valid one, and while having the same physical topology as point-to-point still acts as a loop protocol-wise.
  • Arbitrated loop can be physically cabled in a ring fashion or using a hub. The physical ring ceases to work if one of the devices in the chain fails. The hub on the other hand, while maintaining a logical ring, allows a star topology on the cable level. Each receive port on the hub is simply passed to next active transmit port, bypassing any inactive or failed ports.
  • Fibre Channel ports capable of arbitrated loop communication are NL_port (node loop port) and FL_port (fabric loop port), collecively referred to as the L_ports. Physical connectors on the hub are not considered ports in terms of the protocol.
  • An arbitrated loop with no fabric port (with only NL_ports) is a private loop.
  • An arbitrated loop connected to a fabric through FL_port, is a public loop.
  • NL_Port must provide fabric logon (FLOGI) and name registration facilities to initiate communication with other node through the fabric (to be an initiator).

See also


 
 

 

Copyrights:

Computer Desktop Encyclopedia. THIS COPYRIGHTED DEFINITION IS FOR PERSONAL USE ONLY.
All other reproduction is strictly prohibited without permission from the publisher.
© 1981-2009 Computer Language Company Inc.  All rights reserved.  Read more
Wikipedia. This article is licensed under the Creative Commons Attribution/Share-Alike License. It uses material from the Wikipedia article "Arbitrated loop" Read more