Attachment Unit Interface
Wikipedia on Answers.com:
Top
Attachment Unit Interface
 |
This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (July 2011) |
.jpg)
An Attachment Unit Interface (AUI) is a 15 pin connection that provides a path between a node's Ethernet interface and the Medium Attachment Unit (MAU), sometimes known as a transceiver. It is the part of the IEEE Ethernet standard located between the Media Access Control (MAC), and the MAU. An AUI cable may be up to 50 meters long, although frequently the cable is omitted altogether and the MAU and MAC are directly attached to one another.
AUI connectors became rare beginning in the early 1990s when computers and hubs began to incorporate the MAU, particularly as the 10BASE-T standard became more common and use of 10BASE-5 (thicknet) and 10BASE-2 (thinnet) declined. The electrical AUI connection was still present inside the equipment. By the mid-1990s AUI had all but disappeared as fast Ethernet became more common (fast Ethernet has an equivalent known as Media Independent Interface, MII). Gigabit Ethernet and 10 gigabit Ethernet have respectively the GBIC and XAUI standards which are equivalent to AUI.
A modified form using a smaller connector called the AAUI was introduced on Apple Macintosh computers in 1991, and its use discontinued in 1998.[1]
|
Contents
|
Connector and signals
An AUI connector is a DA-15 (D-subminiature). It has a sliding clip in place of the thumbscrews normally found on a D-connector to hold two connectors together. This clip permits the MAU and MAC to be directly attached to one another even when their size and shape would preclude the use of thumbscrews. This clip is however frequently found to be awkward and/or unreliable.
| Pin | Circuit | Description |
|---|---|---|
| 3 | DO-A | Data Out Circuit A |
| 10 | DO-B | Data Out Circuit B |
| 11 | DO-S | Data Out Circuit Shield (not used) |
| 5 | DI-A | Data In Circuit A |
| 12 | DI-B | Data In Circuit B |
| 4 | DI-S | Data In Circuit Shield |
| 7 | CO-A | Control Out Circuit A (not used) |
| 15 | CO-B | Control Out Circuit B (not used) |
| 8 | CO-S | Control Out Circuit Shield (not used) |
| 2 | CI-A | Control In Circuit A |
| 9 | CI-B | Control In Circuit B |
| 1 | CI-S | Control In Circuit Shield |
| 6 | VC | Voltage Common |
| 13 | VP | Voltage Plus (+12V) |
| 14 | VS | Voltage Shield (not used) |
| Shell | PG | Protective Ground |
See also
References
 |
Wikimedia Commons has media related to: Attachment Unit Interface |
- ^ Dan, Knight. "Apple's AAUI Ethernet Connector". Apple's AAUI Ethernet Connector. http://lowendmac.com/tech/aaui.html. Retrieved 13 February 2012.
External links
- This article was originally based on material from the Free On-line Dictionary of Computing, which is licensed under the GFDL.
This entry is from Wikipedia, the leading user-contributed encyclopedia. It may not have been reviewed by professional editors (see full disclaimer)
Related Videos:
Top
Attachment Unit Interface
Post a question - any question - to the WikiAnswers community:
Copyrights:
Wikipedia on Answers.com
This article is licensed under the Creative Commons Attribution/Share-Alike License. It uses material from the Wikipedia article Attachment Unit Interface.
Read more