bicycle

A mountain bike, a popular multi-use bicycle

A bicycle, often called a bike^[1] (and sometimes referred to as a "pushbike",^[2] "pedal bike",^[3] "pedal cycle",^[4] or "cycle"^[5]), is a human-powered, pedal-driven, single-track vehicle, having two wheels attached to a frame, one behind the other.^[6] A person who rides a bicycle is called a cyclist, or bicyclist.

Bicycles were introduced in the 19th century and now number over one billion worldwide, twice as many as automobiles.^[7] They are the principal means of transportation in many regions. They also provide a popular form of recreation, and have been adapted for such uses as children's toys, adult fitness, military and police applications, courier services and bicycle racing.

The basic shape and configuration of a typical upright bicycle has changed little since the first chain-driven model was developed around 1885.^[8] However, many details have been improved, especially since the advent of modern materials and computer-aided design. These have allowed for a proliferation of specialized designs for particular types of cycling.

The invention of the bicycle has had an enormous impact on society, both in terms of culture and of advancing modern industrial methods. Several components that eventually played a key role in the development of the automobile were originally invented for the bicycle, including ball bearings, pneumatic tires, chain-driven sprockets, and spoke-tensioned wheels.^[9]

Etymology

The word bicycle was coined by the Belgian newspaper La Gaulois in the 1890s.^[10] Before that, and in some places thereafter, bikes were known primarily as velocipedes.

History

Wooden draisine (around 1820), the first two-wheeler and as such the archetype of the bicycle

The Draisienne, Laufmaschine, or dandy horse was the first human means of transport to use only two wheels in tandem and was invented by the German Baron Karl von Drais. It is regarded as the forerunner of the modern bicycle and was introduced by Drais to the public in Mannheim in summer 1817 and in Paris in 1818.^[11] Its rider sat astride a wooden frame supported by two in-line wheels and pushed the vehicle along with his/her feet while steering the front wheel.

Michaux' son on velocipede 1868

Thomas McCall in 1869 on his velocipede

The first mechanically-propelled 2-wheel vehicle may have been built by Kirkpatrick MacMillan, a Scottish blacksmith, in 1839, although the claim is open to dispute.^[12] He is also associated with the first recorded instance of a cycling traffic offence, when a Glasgow newspaper reported in 1842 an accident in which an anonymous "gentleman from Dumfries-shire... bestride a velocipede... of ingenious design" knocked over a little girl in Glasgow and was fined five shillings.^[13]

In the early 1860s, Frenchmen Pierre Michaux and Pierre Lallement took bicycle design in a new direction by adding a mechanical crank drive with pedals on an enlarged front wheel (the velocipede). Another French inventor by the name of Douglas Grasso had a failed prototype of Pierre Lallement's bicycle several years earlier. Several inventions followed using rear wheel drive, the best known being the rod-driven velocipede by Scotsman Thomas McCall in 1869. The French creation, made of iron and wood, developed into the "penny-farthing" (historically known as an "ordinary bicycle", a retronym, since there was then no other kind).^[14] It featured a tubular steel frame on which were mounted wire-spoked wheels with solid rubber tires. These bicycles were difficult to ride due to their very high seat and poor weight distribution. In 1868 a Michaux cycle was brought to Coventry, England by Rowley Turner, sales agent of the Coventry Sewing Machine Company (which soon became the Coventry Machinist Company). His uncle, Josiah Turner, together with business partner James Starley used this as a basis for the 'Coventry Model' in what became Britain's first cycle factory.^[15]

A penny-farthing or ordinary bicycle photographed in the Škoda Auto museum in the Czech Republic

Bicycle in Plymouth, England at the start of the 20th century

The dwarf ordinary addressed some of these faults by reducing the front wheel diameter and setting the seat further back. This necessitated the addition of gearing, effected in a variety of ways, to efficiently use the power available. However, having to both pedal and steer via the front wheel remained a problem. J. K. Starley (nephew of James Starley), J. H. Lawson, and Shergold solved this problem by introducing the chain drive (originated by the unsuccessful "bicyclette" of Englishman Henry Lawson),^[16] connecting the frame-mounted cranks to the rear wheel. These models were known as dwarf safeties, or safety bicycles, for their lower seat height and better weight distribution. (Although without pneumatic tires the ride of the smaller wheeled bicycle would be much rougher than that of the larger wheeled variety.) Starley's 1885 Rover, manufactured in Coventry, England,^[17] is usually described as the first recognizably modern bicycle. Soon, the seat tube was added, creating the double-triangle diamond frame of the modern bike.

Further innovations increased comfort and ushered in a second bicycle craze, the 1890s' Golden Age of Bicycles. In 1888, Scotsman John Boyd Dunlop introduced the first practical pneumatic tire, which soon became universal. Soon after, the rear freewheel was developed, enabling the rider to coast. This refinement led to the 1890s invention^[18] of coaster brakes. Derailleur gears and hand-operated cable-pull brakes were also developed during these years, but were only slowly adopted by casual riders. By the turn of the century, cycling clubs flourished on both sides of the Atlantic, and touring and racing became widely popular.

Bicycles and horse buggies were the two mainstays of private transportation just prior to the automobile, and the grading of smooth roads in the late 19th century was stimulated by the widespread advertising, production, and use of these devices.^[19]

Uses

Transporting milk churns in Kolkata, India

Bicycles have been and are employed for many uses:

A cargo bicycle in Amsterdam, Netherlands

• Utility: transportation, bicycle commuting, and utility cycling
• Work: mail delivery, paramedics, police, couriering, and general delivery.
• Recreation: bicycle touring, mountain biking, BMX and physical fitness.
• Racing: track racing, criterium, roller racing and time trial to multi-stage events like the Tour of California, Giro d'Italia, the Tour de France, the Vuelta a España, the Volta a Portugal, among others.
• Military: scouting, troop movement, supply of provisions, and patrol. See bicycle infantry.
• Show: entertainment and performance, e.g. Artistic cyclings.

Technical aspects

A Half Wheeler trailer bike at the Golden Gate Bridge

The bicycle has undergone continual adaptation and improvement since its inception. These innovations have continued with the advent of modern materials and computer-aided design, allowing for a proliferation of specialized bicycle types.

Types

A BMX bike, an example of a bicycle designed for sport

Bicycles can be categorized in different ways: e.g. by function, by number of riders, by general construction, by gearing or by means of propulsion. The more common types include utility bicycles, mountain bicycles, racing bicycles, touring bicycles, hybrid bicycles, cruiser bicycles, and BMX Bikes. Less common are tandems, lowriders, tall bikes, fixed gear, folding models, amphibious bicycles and recumbents (one of which was used to set the IHPVA Hour record).

Unicycles, tricycles and quadracycles are not strictly bicycles, as they have respectively one, three and four wheels, but are often referred to informally as "bikes".

Bicycles leaning in a turn

Dynamics

A bicycle stays upright while moving forward by being steered so as to keep its center of mass over the wheels.^[20] This steering is usually provided by the rider, but under certain conditions may be provided by the bicycle itself.^[21]

The combined center of mass of a bicycle and its rider must lean into a turn to successfully navigate it. This lean is induced by a method known as countersteering, which can be performed by the rider turning the handlebars directly with the hands^[22] or indirectly by leaning the bicycle.^[23]

Short-wheelbase or tall bicycles, when braking, can generate enough stopping force at the front wheel to flip longitudinally.^[24] The act of purposefully using this force to lift the rear wheel and balance on the front without tipping over is a trick known as a stoppie, endo or front wheelie.

Performance

The bicycle is extraordinarily efficient in both biological and mechanical terms. The bicycle is the most efficient human-powered means of transportation in terms of energy a person must expend to travel a given distance.^[25] From a mechanical viewpoint, up to 99% of the energy delivered by the rider into the pedals is transmitted to the wheels, although the use of gearing mechanisms may reduce this by 10–15%.^[26][27] In terms of the ratio of cargo weight a bicycle can carry to total weight, it is also an efficient means of cargo transportation.

A recumbent bicycle

A human traveling on a bicycle at low to medium speeds of around 10–15 mph (15–25 km/h) uses only the energy required to walk. Air drag, which is proportional to the square of speed, requires dramatically higher power outputs as speeds increase. If the rider is sitting upright, the rider's body creates about 75% of the total drag of the bicycle/rider combination. Drag can be reduced by seating the rider in a more aerodynamically streamlined position. Drag can also be reduced by covering the bicycle with an aerodynamic fairing.

In addition, the carbon dioxide generated in the production and transportation of the food required by the bicyclist, per mile traveled, is less than 1/10 that generated by energy efficient cars.^[28]

Construction and parts

In its early years, bicycle construction drew on pre-existing technologies. More recently, bicycle technology has in turn contributed ideas in both old and new areas.

Frame

Diagram of a bicycle.

The great majority of today's bicycles have a frame with upright seating which looks much like the first chain-driven bike.^[8] Such upright bicycles almost always feature the diamond frame, a truss consisting of two triangles: the front triangle and the rear triangle. The front triangle consists of the head tube, top tube, down tube and seat tube. The head tube contains the headset, the set of bearings that allows the fork to turn smoothly for steering and balance. The top tube connects the head tube to the seat tube at the top, and the down tube connects the head tube to the bottom bracket. The rear triangle consists of the seat tube and paired chain stays and seat stays. The chain stays run parallel to the chain, connecting the bottom bracket to the rear fork ends. The seat stays connect the top of the seat tube (at or near the same point as the top tube) to the rear fork ends.

A Triumph with a step-through frame.

Historically, women's bicycle frames had a top tube that connected in the middle of the seat tube instead of the top, resulting in a lower standover height at the expense of compromised structural integrity, since this places a strong bending load in the seat tube, and bicycle frame members are typically weak in bending. This design, referred to as a step-through frame, allows the rider to mount and dismount in a dignified way while wearing a skirt or dress. While some women's bicycles continue to use this frame style, there is also a variation, the mixte, which splits the top tube laterally into two thinner top tubes that bypass the seat tube on each side and connect to the rear fork ends. The ease of stepping through is also appreciated by those with limited flexibility or other joint problems. Because of its persistent image as a "women's" bicycle, step-through frames are not common for larger frames.

Another style is the recumbent bicycle. These are inherently more aerodynamic than upright versions, as the rider may lean back onto a support and operate pedals that are on about the same level as the seat. The world's fastest bicycle is a recumbent bicycle but this type was banned from competition in 1934 by the Union Cycliste Internationale.^[29]

Historically, materials used in bicycles have followed a similar pattern as in aircraft, the goal being high strength and low weight. Since the late 1930s alloy steels have been used for frame and fork tubes in higher quality machines. Celluloid found application in mudguards, and aluminum alloys are increasingly used in components such as handlebars, seat post, and brake levers. In the 1980s aluminum alloy frames became popular for their lightness, and their affordability now makes them common. More expensive carbon fiber and titanium frames are now also available, as well as advanced steel alloys and even bamboo.^[30]

Drivetrain and gearing

A set of rear sprockets (also known as a cassette) and a derailleur

The drivetrain begins with pedals which rotate the cranks, which are held in axis by the bottom bracket. Most bicycles use a chain to transmit power to the rear wheel. A relatively small number of bicycles use a shaft drive to transmit power. A very small number of bicycles (mainly single-speed bicycles intended for short-distance commuting) use a belt drive as an oil-free way of transmitting power.

Since cyclists' legs are most efficient over a narrow range of pedaling speeds (cadence), a variable gear ratio helps a cyclist to maintain an optimum pedalling speed while covering varied terrain. As a first approximation, utility bicycles often use a hub gear with a small number (3 to 8) of widely spaced gears, road bicycles and racing bicycles use derailleur gears with a moderate number (10 to 22) of closely spaced gear ratios, while mountain bicycles, hybrid bicycles, and touring bicycles use dérailleur gears with a larger number (15 to 33) of moderately spaced gear ratios, often including an extremely low gear ("granny gear") for climbing steep hills.

Different gears and ranges of gears are appropriate for different people and styles of cycling. Multi-speed bicycles allow gear selection to suit the circumstances: a cyclist could use a high gear when cycling downhill, a medium gear when cycling on a flat road, and a low gear when cycling uphill. In a lower gear every turn of the pedals leads to fewer rotations of the rear wheel. This allows the energy required to move the same distance to be distributed over more pedal turns, reducing fatigue when riding uphill, with a heavy load, or against strong winds. A higher gear allows a cyclist to make fewer pedal turns to maintain a given speed, but with more effort per turn of the pedals.

A bicycle with shaft drive instead of a chain

With a chain drive transmission, a chainring attached to a crank drives the chain, which in turn rotates the rear wheel via the rear sprocket(s) (cassette or freewheel). There are four gearing options: two-speed hub gear integrated with chain ring, up to 3 chain rings, up to 11 sprockets, hub gear built in to rear wheel (3-speed to 14-speed). The most common options are either a rear hub or multiple chain rings combined with multiple sprockets (other combinations of options are possible but less common).

With a shaft drive transmission, a gear set at the bottom bracket turns the shaft, which then turns the rear wheel via a gear set connected to the wheel's hub. There is some small loss of efficiency due to the two gear sets needed. The only gearing option with a shaft drive is to use a hub gear.

Steering and seating

The handlebars turn the fork and the front wheel via the stem, which rotates within the headset. Three styles of handlebar are common. Upright handlebars, the norm in Europe and elsewhere until the 1970s, curve gently back toward the rider, offering a natural grip and comfortable upright position. Drop handlebars "drop" as they curve forward and down, offering the cyclist best braking power from a more aerodynamic "crouched" position, as well as more upright positions in which the hands grip the brake lever mounts, the forward curves, or the upper flat sections for increasingly upright postures. Mountain bikes generally feature a 'straight handlebar' or 'riser bar' with varying degrees of sweep backwards and centimeters rise upwards, as well as wider widths which can provide better handling due to increased leverage against the wheel.

A Selle San Marco saddle designed for women

Saddles also vary with rider preference, from the cushioned ones favored by short-distance riders to narrower saddles which allow more room for leg swings. Comfort depends on riding position. With comfort bikes and hybrids, cyclists sit high over the seat, their weight directed down onto the saddle, such that a wider and more cushioned saddle is preferable. For racing bikes where the rider is bent over, weight is more evenly distributed between the handlebars and saddle, the hips are flexed, and a narrower and harder saddle is more efficient. Differing saddle designs exist for male and female cyclists, accommodating the genders' differing anatomies, although bikes typically are sold with saddles most appropriate for men.

A recumbent bicycle has a reclined chair-like seat that some riders find more comfortable than a saddle, especially riders who suffer from certain types of seat, back, neck, shoulder, or wrist pain. Recumbent bicycles may have either under-seat or over-seat steering.

Brakes

Linear-pull brake, also known by the Shimano trademark: V-Brake, on rear wheel of a mountain bike

Modern bicycle brakes may be: rim brakes, in which friction pads are compressed against the wheel rims; internal hub brakes, in which the friction pads are contained within the wheel hubs; or disc brakes, with a separate rotor for braking. Disc brakes are more common for off-road bicycles, tandems and recumbent bicycles than on road-specific bicycles.

A front disc brake, mounted to the fork and hub

With hand-operated brakes, force is applied to brake levers mounted on the handlebars and transmitted via Bowden cables or hydraulic lines to the friction pads. A rear hub brake may be either hand-operated or pedal-actuated, as in the back pedal coaster brakes which were popular in North America until the 1960s, and are common in children's bicycles.

Track bicycles do not have dedicated brakes. Brakes are not required for riding on a track because all riders ride in the same direction around a track which does not necessitate sharp deceleration. Track riders are still able to slow down because all track bicycles are fixed-gear, meaning that there is no freewheel. Without a freewheel, coasting is impossible, so when the rear wheel is moving, the crank is moving. To slow down, the rider applies resistance to the pedals – this acts as a braking system which can be as effective as a friction-based rear wheel brake, but not as effective as a front wheel brake.^[31]

Suspension

Bicycle suspension refers to the system or systems used to suspend the rider and all or part of the bicycle. This serves two purposes:

• To keep the wheels in continuous contact with rough surfaces to improve control.

• To isolate the rider and luggage from jarring due to rough surfaces.

Bicycle suspensions are used primarily on mountain bicycles, but are also common on hybrid bicycles, and can even be found on some road bicycles, as they can help deal with problematic vibration. Suspension is especially important on recumbent bicycles, since while an upright bicycle rider can stand on the pedals to achieve some of the benefits of suspension, a recumbent rider cannot.

Wheels and tires

The wheel axle fits into fork ends in the frame and fork. A pair of wheels may be called a wheelset, especially in the context of ready-built "off the shelf", performance-oriented wheels.

Tires vary enormously. Skinny 18 to 25 millimeters wide, road-racing tires may be completely smooth, or slick. On the opposite extreme, off-road tires are 38 to 64 millimeters wide and usually have a deep tread for gripping in muddy conditions or metal studs for ice.

Accessories, repairs, and tools

Touring bicycle equipped with front and rear racks, fenders/mud-guards, water bottles in cages, four panniers and a handlebar bag.

Puncture repair kit with tire levers, sandpaper to clean off an area of the inner tube around the puncture, a tube of rubber solution (vulcanizing fluid), round and oval patches, a metal grater and piece of chalk to make chalk powder (to dust over excess rubber solution). Kits often also include a wax crayon to mark the puncture location.

Some components, which are often optional accessories on sports bicycles, are standard features on utility bicycles to enhance their usefulness and comfort. Mudguards, or fenders, protect the cyclist and moving parts from spray when riding through wet areas and chainguards protect clothes from oil on the chain while preventing clothing from being caught between the chain and crankset teeth. Kick stands keep a bicycle upright when parked, while a bike lock will help prevent it from being stolen. Front-mounted baskets for carrying goods are often used. Luggage carriers and panniers mounted above the rear tire can be used to carry equipment or cargo. Parents sometimes add rear-mounted child seats and/or an auxiliary saddle fitted to the crossbar to transport children.

Toe-clips and toestraps and clipless pedals help keep the foot locked in the proper position on the pedals, and enable the cyclist to pull as well as push the pedals—although not without their hazards, e.g. may lock foot in when needed to prevent a fall. Technical accessories include cyclocomputers for measuring speed, distance, heart rate, GPS data etc. Other accessories include lights, reflectors, security locks, mirror, water bottles and cages, and bell.^[32]

Bicycle helmets may help reduce injury in the event of a collision or accident, and a certified helmet is legally required for some riders in some jurisdictions. Helmets are classified as an accessory^[32] or an item of clothing by others.^[33]

Many cyclists carry tool kits. These may include a tire patch kit (which, in turn, may contain any combination of a hand pump or CO₂ Pump, tire levers, spare tubes, self-adhesive patches, or tube-patching material, an adhesive, a piece of sandpaper or a metal grater (for roughing the tube surface to be patched),^[34][35] and sometimes even a block of French chalk.), wrenches, hex keys, screwdrivers, and a chain tool. There are also cycling specific multi-tools that combine many of these implements into a single compact device. More specialized bicycle components may require more complex tools, including proprietary tools specific for a given manufacturer.

Some bicycle parts, particularly hub-based gearing systems, are complex, and many cyclists prefer to leave maintenance and repairs to professional bicycle mechanics. In some areas it is possible to purchase road-side assistance from companies such as the Better World Club. Other cyclists maintain their own bicycles, perhaps as part of their enjoyment of the hobby of cycling or simply for economic reasons. A cyclist's ability to repair and maintain their own bicycle is also celebrated within the DIY movement.

Standards

A number of formal and industry standards exist for bicycle components to help make spare parts exchangeable and to maintain a minimum product safety.

The International Organization for Standardization, ISO, has a special technical committee for cycles, TC149, that has the following scope: "Standardization in the field of cycles, their components and accessories with particular reference to terminology, testing methods and requirements for performance and safety, and interchangeability."

CEN, European Committee for Standardisation, also has a specific Technical Committee, TC333, that defines European standards for cycles. Their mandate states that EN cycle standards shall harmonize with ISO standards. Some CEN cycle standards were developed before ISO published their standards, leading to strong European influences in this area. European cycle standards tend to describe minimum safety requirements, while ISO standards have historically harmonized parts geometry.^[36]

Parts

For details on specific bicycle parts, see list of bicycle parts and category:bicycle parts.

Social and historical aspects

The bicycle has had a considerable effect on human society, in both the cultural and industrial realms.

In daily life

Around the turn of the 20th century, bicycles reduced crowding in inner-city tenements by allowing workers to commute from more spacious dwellings in the suburbs. They also reduced dependence on horses. Bicycles allowed people to travel for leisure into the country, since bicycles were three times as energy efficient as walking and three to four times as fast.

A bike-sharing station in Barcelona

Recently,^[when?] several European and North American cities have implemented successful schemes known as community bicycle programs or bike-sharing.^[37][38] These initiatives complement a city's public transport system and offer an alternative to motorized traffic to help reduce congestion and pollution.^[39] In Europe, especially in The Netherlands and parts of Germany and Denmark, commuting by bicycle is very common. In the Danish capital of Copenhagen, a cyclists' organization runs a Cycling Embassy, that promotes biking for commuting and sightseeing. The United Kingdom has a tax break scheme (IR 176) that allows employees to buy a new bicycle tax free to use for commuting.^[40]

In The Netherlands, all train stations are equipped with provisions for bicycle parking for free or a more secure parking place for a small fee and the larger ones also with bicycle repair shops, and cycling is so popular that the parking capacity is sometimes exceeded. In Delft the capacity is usually exceeded.^[41] In Trondheim in Norway, the Trampe bicycle lift has been developed to encourage cyclists by giving assistance on a steep hill. Buses in many cities have bicycle carriers mounted on the front.

In cities where the bicycle is not an integral part of the planned transportation system, commuters often use bicycles as elements of a mixed-mode commute, where the bike is used to travel to and from train stations or other forms of rapid transit. Some students who commute several miles drive a car from home to a campus parking lot, then ride a bicycle to class. Folding bicycles are useful in these scenarios, as they are less cumbersome when carried aboard. Los Angeles removed a small amount of seating on some trains to make more room for bicycles and wheel chairs.^[42]

Bike racks in Vancouver, British Columbia

Some US companies, notably in the tech sector, are developing both innovative cycle designs and cycle-friendliness in the workplace. Google is working to encourage use of a seven-person four-wheel^[43] "Conference Bike", employing riders' muscle energy while also allowing conversational interaction. FourSquare, whose CEO Dennis Crowley "pedaled to pitch meetings ... [when he] was raising money from venture capitalists" on a two-wheeler, chose a new location for its New York headquarters "based on where biking would be easy". Parking in the office was also integral to HQ planning. Mitchell Moss, who runs the Rudin Center for Transportation Policy & Management at New York University, said in 2012: "Biking has become the mode of choice for the educated high tech worker."^[44]

Bicycles offer an important mode of transport in many developing countries. Until recently, bicycles have been a staple of everyday life throughout Asian countries. They are the most frequently used method of transport for commuting to work, school, shopping, and life in general. They also offer a degree of exercise to keep the individual healthy. ^[45]

Bicycles are also celebrated through use of visual art. An example of bicycles being appreciated through use of art, music, and film is the Bicycle Film Festival, a film festival hosted all around the world.

Poverty alleviation

Experiments done in Africa (Uganda and Tanzania) and Sri Lanka on hundreds of households have shown that a bicycle can increase the income of a poor family by as much as 35%.^[46][47][48] Transport, if analyzed for the cost-benefit analysis for rural poverty alleviation, has given one of the best returns in this regard. For example, road investments in India were a staggering 3-10 times more effective than almost all other investments and subsidies in rural economy in the decade of 1990s. What a road does at a macro level to increase transport, the bicycle supports at the micro level. The bicycle, in that sense, can be one of the best means to eradicate poverty in poor nations.

Female emancipation

Woman with bicycle, 1890s

The safety bicycle gave women unprecedented mobility, contributing to their emancipation in Western nations. As bicycles became safer and cheaper, more women had access to the personal freedom they embodied, and so the bicycle came to symbolize the New Woman of the late 19th century, especially in Britain and the United States.

The bicycle was recognized by 19th-century feminists and suffragists as a "freedom machine" for women. American Susan B. Anthony said in a New York World interview on February 2, 1896: "Let me tell you what I think of bicycling. I think it has done more to emancipate women than anything else in the world. It gives women a feeling of freedom and self-reliance. I stand and rejoice every time I see a woman ride by on a wheel... the picture of free, untrammeled womanhood." In 1895 Frances Willard, the tightly laced president of the Women’s Christian Temperance Union, wrote a book called How I Learned to Ride the Bicycle, in which she praised the bicycle she learned to ride late in life, and which she named "Gladys", for its "gladdening effect" on her health and political optimism. Willard used a cycling metaphor to urge other suffragists to action, proclaiming, "I would not waste my life in friction when it could be turned into momentum."

The bicycle craze in the 1890s also led to a movement for so-called rational dress, which helped liberate women from corsets and ankle-length skirts and other restrictive garments, substituting the then-shocking bloomers.

Economic implications

Columbia Bicycles advertisement from 1886

Bicycle manufacturing proved to be a training ground for other industries and led to the development of advanced metalworking techniques, both for the frames themselves and for special components such as ball bearings, washers, and sprockets. These techniques later enabled skilled metalworkers and mechanics to develop the components used in early automobiles and aircraft.

They also served to teach the industrial models later adopted, including mechanization and mass production (later copied and adopted by Ford and General Motors),^[49] vertical integration^[50] (also later copied and adopted by Ford), aggressive advertising^[51] (as much as 10% of all advertising in U.S. periodicals in 1898 was by bicycle makers),^[52] lobbying for better roads (which had the side benefit of acting as advertising, and of improving sales by providing more places to ride),^[53] all first practised by Pope.^[53] In addition, bicycle makers adopted the annual model change^[54][55] (later derided as planned obsolescence, and usually credited to General Motors), which proved very successful.^[56]

Furthermore, early bicycles were an example of conspicuous consumption, being adopted by the fashionable elites.^[57] In addition, by serving as a platform for accessories, which could ultimately cost more than the bicycle itself, it paved the way for the likes of the Barbie doll.^[58]

Moreover, they helped create, or enhance, new kinds of businesses, such as bicycle messengers,^[59] travelling seamstresses,^[60] riding academies,^[61] and racing rinks^[62] (Their board tracks were later adapted to early motorcycle and automobile racing.) Also, there were a variety of new inventions, such as spoke tighteners,^[63] and specialized lights,^[64] socks and shoes,^[65] and even cameras (such as the Eastman Company's Poco).^[66] Probably the best known and most widely used of these inventions, adopted well beyond cycling, is Charles Bennett's Bike Web, which came to be called the "jock strap".^[67]

A man uses a bicycle to carry goods in Ouagadougou, Burkina Faso

They also presaged a move away from public transit^[68] that would explode with the introduction of the automobile.

J. K. Starley's company became the Rover Cycle Company Ltd. in the late 1890s, and then simply the Rover Company when it started making cars. Morris Motors LImited (in Oxford) and Škoda also began in the bicycle business, as did the Wright brothers.^[69] Alistair Craig, whose company eventually emerged to become the engine manufacturers Ailsa Craig, also started from manufacturing bicycles, in Glasgow in March 1885.

In general, U.S. and European cycle manufacturers used to assemble cycles from their own frames and components made by other companies, although very large companies (such as Raleigh) used to make almost every part of a bicycle (including bottom brackets, axles, etc.) In recent years, those bicycle makers have greatly changed their methods of production. Now, almost none of them produce their own frames.

Many newer or smaller companies only design and market their products; the actual production is done by Asian companies. For example, some 60% of the world's bicycles are now being made in China. Despite this shift in production, as nations such as China and India become more wealthy, their own use of bicycles has declined due to the increasing affordability of cars and motorcycles.^[70] One of the major reasons for the proliferation of Chinese-made bicycles in foreign markets is the lower cost of labor in China.^[71]

One of the profound economic implications of bicycle use is that it liberates the user from oil consumption (Ballantine, 1972). The bicycle is an inexpensive, fast, healthy and environmentally friendly mode of transport (Illich, 1974)

Manufacturing

The global bicycle market is $61 billion in 2011.^[72] 130 million bicycles are sold every year globally and 66% of them are made in China.^[73]

Legal requirements

Early in its development, as with automobiles, there were restrictions on the operation of bicycles. Along with advertising, and to gain free publicity, Albert A. Pope litigated on behalf of cyclists.^[74]

The 1968 Vienna Convention on Road Traffic of the United Nations considers a bicycle to be a vehicle, and a person controlling a bicycle (whether actually riding or not) is considered an operator. The traffic codes of many countries reflect these definitions and demand that a bicycle satisfy certain legal requirements before it can be used on public roads. In many jurisdictions, it is an offense to use a bicycle that is not in a roadworthy condition.

In most jurisdictions, bicycles must have functioning front and rear lights when ridden after dark. As some generator or dynamo-driven lamps only operate while moving, rear reflectors are frequently also mandatory. Since a moving bicycle makes little noise, some countries insist that bicycles have a warning bell for use when approaching pedestrians, equestrians, and other cyclists, though sometimes a car horn can be used when a 12 volt battery is available.

Some countries require child and/or adult cyclists to wear helmets, as this may protect riders from head trauma. Countries which require adult cyclists to wear helmets include Spain, New Zealand and Australia. Mandatory helmet wearing is one of the most controversial topics in the cycling world, with proponents arguing that it reduces head injuries and thus is an acceptable requirement, while opponents argue that by making cycling seem more dangerous and cumbersome, it reduces cyclist numbers on the streets, creating an overall negative health effect (fewer people cycling for their own health, and the remaining cyclists being more exposed through a reversed safety in numbers effect).

See also

Listen to this article (info/dl)

This audio file was created from a revision of the "Bicycle" article dated 2007-12-07, and does not reflect subsequent edits to the article. (Audio help)

More spoken articles

Sustainable development portal

• Cycling – use of bicycles
• Outline of bicycles

General

Women on bicycles on unpaved road, USA, late 19th Century

Special uses and related vehicle types

Other

• Bicycle Shaped Object
• Human-powered transport
• Safety standards
• Transportation technology, timeline of

Notes

References

• All About Bicycling, Rand McNally.
• Richard Ballantine, Richard's Bicycle Book, Pan, 1975.
• Caunter C. F. The History and Development of Cycles Science Museum London 1972.
• David B. Perry, Bike Cult: the Ultimate Guide to Human-powered Vehicles, Four Walls Eight Windows, 1995.
• Roni Sarig, The Everything Bicycle Book, Adams Media Corporation, 1997
• "Randonneurs USA". PBP: Paris-Brest-Paris. March 31, 2005. http://www.rusa.org/pbp.html. 
• US Department of Transportation, Federal Highway Administration. "America's Highways 1776-1976", pp. 42–43. Washington, DC, US Government Printing Office.
• David Gordon Wilson, Bicycling Science, MIT press, ISBN 0-262-73154-1
• David V. Herlihy, Bicycle: The History, Yale University Press, 2004
• Frank Berto, The Dancing Chain: History and Development of the Derailleur Bicycle, San Francisco: Van der Plas Publications, 2005, ISBN 1-892495-41-4.
• The Data Book: 100 Years of Bicycle Component and Accessory Design, San Francisco: Van der Plas Publications, 2005, ISBN 1-892495-01-5.
• Shonquis Moreno and Ole Wagner, Velo: bicycle culture and design. Edited by Robert Klanten and Sven Ehmann. Berlin: Gestalten, 2010, ISBN 978-3-89955-284-3

External links

Wikibooks has a book on the topic of Bicycles/Maintenance_and_Repair

Wikimedia Commons has media related to: Bicycle

Wikimedia Commons has media related to: Bicycles

Wikisource has original text related to this article: Bicycle (1911 Encyclopædia Britannica article)

• Pedaling History Museum The world's largest bicycle museum
• A range of Traffic Advisory Leaflets produced by the UK Department for Transport covering cycling.
• A History of Bicycles and Other Cycles at the Canada Science and Technology Museum