A binding post is used in electrical equipment. It is most used
on electronic test equipment to attach a test lead, or a single
wire. Audio equipment uses binding posts.
A binding post is used in electrical equipment. It is most used
on electronic test equipment to attach a test lead, or a single
wire. Audio equipment uses binding posts.
View page
The s13 and s14 alternators are different. The binding post is
located on the side of the s14 and on the back of the s13
alternator. The alternators can be interchanged with minimal
customizing to the wire that attatches to the binding post.
View page
They are wired up the same as any standard coil machine, with
the input wire being connected to the rear binding post, and the
output wire connected to the top binding post.
View page
Binding is defined as the connection between the function call
and the corresponding program code to be executed. There are two
types of bindings. They are; 1.static binding and 2.Dynamic
binding.
View page
An example of post-transitional control is the binding of the
repressor to the operator. The CAP is activated when cAMP binds to
the site.