Bottle opener

This article does not cite any references or sources. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (May 2007)

It has been suggested that this article or section be merged with Corkscrew. (Discuss)

Pocket knife with bottle opener

A bottle opener is a device that enables the removal of metal bottle caps from bottles. More generally, it might be thought to include corkscrews used to remove cork or plastic stoppers from wine bottles.

Another name for some types of bottle opener is church key.

A metal bottle cap is affixed to the rim of the neck of a bottle by being pleated or ruffled around the rim. A bottle opener is a specialised lever inserted beneath the pleated metalwork, which uses a point on the bottle cap as a fulcrum on which to pivot.

Varieties

There are several distinct designs of such bottle openers. Wall mounted openers are typically found behind bars in pubs, whilst hand-tool bottle openers tend to be found and used in domestic environments. Whereas the functional elements of bottle openers (a tooth or lip to catch the underside of the cap, a fulcrum across which to exert the force that will remove the cap, and usually a lever for mechanical advantage) tend to be consistent (sometimes the lever is the bottle itself), their aesthetic design is subject to very great variety, and a great many decorative types are available.

The following varieties of bottle opener are used around the world used in a professional capacity.

The Crown Cork Opener

A simple bottle opener

Invented at the same time as the crown cork it is the original "bar blade". But as well as being portable it also comes as a fixed device to be attached to vertical surfaces, often with a tray to catch the bottle tops. Again, though, it does not open wine.It is class 2 fulcrum type.

Simple Bottle Opener

Key Fob Opener

A simple opener is just a piece of metal with a rectangular or rounded opening in one end and a solid handle large enough to be gripped between the thumb and forefingers on the other. The opening contains a lip that is placed under the edge of the bottle top, pulling it off when upward force is applied to the handle end of the opener. This type of opener is small and durable, so it is frequently used as a key fob.

Bar Blade

A Budweiser branded "bar blade", front and back

A relatively new trend in opening. It is a flat blade of steel approximately 4 cm wide and 16 cm long with a thumb hole at one end and a letterbox cut at the other to remove the caps from beers and soft drinks. It has gained fashionability through widespread usage by professional bartenders in Canada, the USA, and most notably the UK. Carried in the pocket or against the body or on a zip string, it is both convenient and fast for the modern bartender. Its obvious disadvantage is that it does not remove corks.

It also differs in being used primarily as a first-class lever (instead of a second-class lever), as discussed in technique, below.

Wall-Mounted

A wall-mounted bottle opener

Works the same as the lever variation, except that it is attached to the wall, to allow for simpler bottle-opening, which can be done with one hand. The bottle cap can fall into a bottle cap catcher mounted below the opener, or you can retrieve it after removal from the bottle. The most famous wall mounted bottle opener manufacturer, Brown Mfg. Company, has been producing bottle openers since 1925. A Brown Mfg. Co. bottle opener carries the trademark "STARR" at the base of the opener.

Multi-Opener

Also known as a Beverage Opener, these usually includes a bottle opener of the Simple Bottle Opener Style but includes various other openers such as for plastic bottles or metal beverage cans.^[1]

Novelty/designer

In recent years the bottle opener has taken many forms to appeal to the young professional type. A few examples of the designer bottle opener include the inclusion of a bottle opener in the sole of a flip flop,in the form of a ring that can be worn, as part of a belt buckle, or in the shape of a house or car key.

Technique

Traditional bottle opener, with far end curved, intended for second-class lever use.

Contemporary bar bland, with near end curved, intended for first-class lever use.

Under most use, a bottle opener functions as a second-class lever: the fulcrum is the far end of the bottle opener, placed on the top of the crown, with the output at the near end of the bottle opener, on the crown edge, between the fulcrum and the hand: in these cases, one pushes up on the lever.

However, one may instead use it as a first-class lever, by placing the near end on the top of the crown, and the far end under the crown edge, then pushing down on the lever (thus the output is on the opposite side of the fulcrum from the hand). This is particularly used with bar blades, and is more dramatic, as the lever forms an obtuse angle. Mechanically, this is a marginally less effective lever, as the effort arm is shorter, but the action of pushing down is both anatomically easier, and aided by gravity.

While most lever-type bottle openers can be used in either configuration, the designed use can be determined if one of the edges is curved, in which case this edge is designed to sit in the middle of the crown, as the curve concentrates pressure, deforming the crown, and a curved edge does not connect with as much of the crown edge, hence being suboptimal and slipping more frequently if used to connect with the crown edge. This difference can be seen in comparing the traditional opener and contemporary bar blade at right.

Corkscrews

It has been suggested that this article or section be merged into Corkscrew. (Discuss)

Waiter's Friend or Wine Key

Opened Waiter's Friend

This common wine opener consists of a flat housing (often plastic covered) similar to a Swiss army knife with a corkscrew and lever (which doubles as crown cork opener) with either a knife or auto-foiler to remove the foil top of wine bottles and then the cork. Designed to be screwed in to within 1 full rotation before the end of the screw (more will pierce the bottom of the cork and result in extra flotsam on the surface of your wine) before levering out the cork.

The Cork Master

This tool is used by businesses that need to open a large volume of wine efficiently and without waste or breakage. It is a large brass tubular device, fixed at a 45° angle to the bar, with a lever pivoted halfway and extending towards the user. The bottle's neck is inserted firmly in the lower aperture of the tube and the lever pulled down firmly and steadily to the bottom. This drives a corkscrew into the cork at a regular depth each time. When the lever is returned to its original position it extracts the cork. When the bottle is removed pull the lever to expose the cork at the bottom, it loosens the cork and returns the lever firmly to its starting position, whereupon the cork will then fall out. This type of opener has no crown cork opening facilities and cannot open crown cork bottles, such as those used for beer and bottled water.

Twin prong cork puller

An "Ah-So" cork puller

The twin prong cork puller, also called the Butler's Friend or Ah-So, is shaped like a large key with a squared oval handle about 5 cm × 8 cm, and two thin metal strips, approximately 10 cm long, 5 mm wide, and 0.5 mm thick, descending in tandem from the center of the handle. The two strips are spread open and then wiggled into the space between the cork and the bottle on either side. Once fully in place, a turn and pull of the handle causes friction to turn the cork and pull it out of the bottle.

"Ah-so" is a translation of the German title, "Ach so!",^{[citation needed]} an expression meaning roughly "Ah, I see." It is named so because its appearance often baffles people, but when its use is demonstrated, they often exclaim "Ah! So that's how it works".^{[citation needed]} The ah-so is useful in opening old bottles with brittle corks, because it does not puncture the cork, limiting the likelihood of a brittle cork crumbling into the wine. However, the Ah-So can inadvertently push the cork further into the bottle instead of extracting it.^[2]

References

See also

• Shanghai World Financial Center, said to resemble a giant bottle opener