Calibration curve: Definition from Answers.com

This article includes a list of references or external links, but its sources remain unclear because it has insufficient inline citations. Please help to improve this article by introducing more precise citations where appropriate. (October 2008)

A calibration curve plot showing limit of detection (LOD), limit of quantification (LOQ), dynamic range, and limit of linearity (LOL).

In analytical chemistry, a calibration curve is a general method for determining the concentration of a substance in an unknown sample by comparing the unknown to a set of standard samples of known concentration.^[1] A calibration curve is one approach to the problem of instrument calibration; other approaches may mix the standard into the unknown, giving an internal standard.

The calibration curve is a plot of how the instrumental response, the so-called analytical signal, changes with the concentration of the analyte (the substance to be measured). The operator prepares a series of standards across a range of concentrations near the expected concentration of analyte in the unknown. The concentrations of the standards must lie within the working range of the technique (instrumentation) they are using (see figure).^[2] Analyzing each of these standards using the chosen technique will produce a series of measurements. For most analyses a plot of instrument response vs. analyte concentration will show a linear relationship. The operator can measure the response of the unknown and, using the calibration curve, can interpolate to find the concentration of analyte.

1 How to create a calibration curve
2 Error in Calibration Curve Results
3 Applications
4 Notes
5 Bibliography

How to create a calibration curve

The data - the concentrations of the analyte and the instrument response for each standard - can be fit to a straight line, using linear regression analysis. This yields a model described by the equation y = mx + y0, where y is the instrument response, m represents the sensitivity, and y₀ is a constant that describes the background. The analyte concentration (x) of unknown samples may be calculated from this equation.

Many different variables can be used as the analytical signal. For instance, chromium (III) might be measured using a chemiluminescence method, in an instrument that contains a photomultiplier tube (PMT) as the detector. The detector converts the light produced by the sample into a voltage, which increases with intensity of light. The amount of light measured is the analytical signal.

Most analytical techniques use a calibration curve. There are a number of advantages to this approach. First, the calibration curve provides a reliable way to calculate the uncertainty of the concentration calculated from the calibration curve (using the statistics of the least squares line fit to the data). ^[3]

Second, the calibration curve provides data on an empirical relationship. The mechanism for the instrument's response to the analyte may be predicted or understood according to some theoretical model, but most such models have limited value for real samples. (Instrumental response is usually highly dependent on the condition of the analyte, solvents used and impurities it may contain; it could also be affected by external factors such as pressure and temperature.)

Many theoretical relationships, such as fluorescence, require the determination of an instrumental constant anyway, by analysis of one or more reference standards; a calibration curve is a convenient extension of this approach. The calibration curve for a particular analyte in a particular (type of) sample provides the empirical relationship needed for those particular measurements.

The chief disadvantages are that the standards require a supply of the analyte material, preferably of high purity and in known concentration. (Some analytes - e.g., particular proteins - are extremely difficult to obtain pure in sufficient quantity.)

Error in Calibration Curve Results

As expected, the concentration of the unknown will have some error which can be calculated from the formula below.^[4]^[5] This formula assumes that a linear relationship is observed for all the standards. It is important to note that the error in the concentration will be minimal if the signal from the unknown lies in the middle of the signals of all the standards (the term $y_{unk}-\bar{y}$ goes to zero if $y_{unk}=\bar{y}$ )

$s_x=\frac{s_y}{|m|}\sqrt{\frac{1}{n}+\frac{1}{k}+\frac{(y_{unk}-\bar{y})^2}{m^2\sum{(x_i-\bar{x})^2}}}$

$s y$ is the standard deviation in the residuals [1] $=\sqrt{\frac{\sum{(y_i-mx_i-b)}^2}{n-2}}$
$m$ is the slope of the line
$b$ is the y-intercept of the line
$n$ is the number standards
$k$ is the number of replicate unknowns
$y u n k n o w n$ is the measurement of the unknown
$\bar{y}$ is the average measurement of the standards
$x i$ are the concentrations of the standards
$\bar{x}$ is the average concentration of the standards

Applications

Analysis of concentration
Verifying the proper functioning of an analytical instrument or a sensor device such as an ion selective electrode
Determining the basic effects of a control treatment (such as a dose-survival curve in clonogenic assay)

Notes

^ http://terpconnect.umd.edu/~toh/models/CalibrationCurve.html
^ http://www.fda.gov/downloads/Drugs/GuidanceComplianceRegulatoryInformation/Guidances/UCM070107.pdf
^ The details for this procedure may be found in D. A. Skoog et al. (2006). Principles of Instrumental Analysis. , as well as many other textbooks.
^ http://www.chem.utoronto.ca/coursenotes/analsci/StatsTutorial/ConcCalib.html
^ http://alpha.chem.umb.edu/chemistry/ch361/Salter%20jchem%20ed%201.pdf

Bibliography

Harris, Daniel Charles (2003). Quantitative chemical analysis. San Francisco: W.H. Freeman. ISBN 0-7167-4464-3.
Crouch, Stanley; Skoog, Douglas A. (2007). Principles of Instrumental Analysis. Pacific Grove: Brooks Cole. ISBN 0-495-01201-7.
Lavagnini I, Magno F (2007). "A statistical overview on univariate calibration, inverse regression, and detection limits: Application to gas chromatography/mass spectrometry technique". Mass spectrometry reviews 26 (1): 1–18. doi:10.1002/mas.20100. PMID 16788893.

v • d • e Analytical chemistry

Instrumentation	Atomic absorption spectrometer · Flame emission spectrometer · Gas chromatograph · High performance liquid chromatograph · Infrared Spectrometer · Mass spectrometer · Melting point apparatus · Microscope · Spectrometer · Spectrophotometer

Techniques	Calorimetry · Chemometrics · Chromatography · Electrochemistry · Gravimetric analysis · Mass spectrometry · Spectroscopy

Sampling	Coning and quartering · Dilution · Dissolution · Filtration · Masking · Pulverization · Sample preparation · Separation process · Sub-sampling

Prominent publications	Analytical Chemistry

Chemistry

This entry is from Wikipedia, the leading user-contributed encyclopedia. It may not have been reviewed by professional editors (see full disclaimer)

Donate to Wikimedia

	Immunonephelometry (immunology)
	calibration (in archaeology)
	Standard addition

	What is the advantage of the standard addition method over the direct calibration curve method? Read answer...
	Answering How do you draw the calibration curve for estimation of potassium in soil using flame photometry? Read answer...
	How do you draw the calibration curve for estimation of potassium in soil using flame photometry? Read answer...

	What is the purpose of constructing a calibration curve?
	How will you know if your calibration curve is acceptable?
	Why a calibration curve constructed?

		Sci-Tech Dictionary. McGraw-Hill Dictionary of Scientific and Technical Terms. Copyright © 2003, 1994, 1989, 1984, 1978, 1976, 1974 by McGraw-Hill Companies, Inc. All rights reserved. Read more
		Wikipedia. This article is licensed under the Creative Commons Attribution/Share-Alike License. It uses material from the Wikipedia article "Calibration curve". Read more

Calibration curve

Contents

How to create a calibration curve

Error in Calibration Curve Results

Applications

Notes

Bibliography