You take a 5' or 6' copper pipe 3/4" or 1" pipe and take a block of wood, I used a 2X4 and place on the top of this pipe. Take a hammer and bound onto the board which will drive the pipe into the ground. You will want to go into Mother Earth atleast 1-1/2' so the pipe will stand on it's own. If you are in an area where the ground is frozen, take hot water and keep pouring on the spot where you want to place the Earth CB, this will help thaw out the area.

After getting the pipe in the ground and standing, you can take some crystals I used single terminated crystals about 5 of them and dropped them into the pipe so they will lay on Mother Earth. Next you will take some curly aluminum metals and drop some down the pipe. I used copper coated bb's next and zinc bb's next as I love to use them in all my creations. Then next I put some copper spirals and SBB coils I made. You want to make sure that you don't over do this bottom part and you leave plenty of space empty at the top of the pipe. This will allow the Dead Orgone to come in and let the Positive Orgone back out.

Next you can mix up your resin and hardener, this is the time to add activated charcoal if you want, the liquid colliodal vitamins and minerals, put this into the resin first before the hardener and mix real well. Finally add your hardener and you will put more than required since you added liquid to the mix.

Take this outside to the Earth CB and pour into the pipe. Now if you want to know how much is in the bottom and if it is covering what you put in there, take a flashlight and keep flashing it down the pipe, you will see the liquid when enough has been poured. Tap ingredients down with a stick and if you need to add more resin then do so.

The pipe will then become hot, very hot so be careful around it.

Now is the time to sit back and watch. I saw the ground making waves and the air around the pipe start to be wavy. I can't see elementals or devas but someone on the CB forum reported that he could see them hoovering above the Earth CB. Others who are energy sensitive can also see the orgone shooting out of the pipe and into the air.

Other things you can try is putting pipes at different lengths around the middle one.....putting other pipes into the ground at 33 degrees and putting the same thing in them and then pouring the resin, everything will be at an angle this way.....I want to use short pipes for this one and see what happens.

Also you might be able to use shorter wider pipes in the ground also, not sure on this one but sounds like it would work. It is very limitless in my mind. I believe this is like giving Mother Earth accupuncture and if done on ley lines and in votex' might see a Hugh difference in the outcome. Also I believe if there are any underground bases it will help with those as well.

Easy to take short pipes into the woods, and plant these Earth CB's everywhere.....easy to take your ingredients with you, and your resin and harder and mix right there on the spot.

Just some idea here, the truth is in trying it and experiencing it on your own. Very inexpensive way for everyone to enjoy the benefits of a CB and helping Mother Earth, Mankind and the Universe.

Hope this explains and helps, if you don't understand something please ask and I will try and clarify what I meant.

Enjoying clear blue skies here with no clouds and a crispness of winter.

Resources

Top Categories

Product

Company