A condenser rejects heat to the environment to turn vapor into liquid. Ideally a vapor enters the condenser as saturated vapor, meaning it's at the boiling point. The vapor condenses and leaves the condenser at saturated liquid (also at the boiling temperature).

In a total condenser te temperature is lowerd to a level on which all gasses turn to liquids. with a partial condenser you can separate gasses on there dew point. It means that the temperature is set to a level on wich a one or several gasses leave the partial condenser as a liquid and the others as a gas.

The condenser-- when answering for a microscope!

A condenser is a device which condenses the steam at the exhaust of turbine. Condensers are classified in to two types.Such as

(1) Jet condenser

(2) Surface condenser

It serves important functions. Such as

1. The condenser enables the recovery and recirculation of pure feed water into the plant. Thus,

(i)The cost of water softening plant is reduced and

(ii) It also saves the cost of fresh water to be supplied to the boiler.

Liebig condenser, Vigreaux column, Snyder column, West condenser, Allihn condenser, Graham condenser, Dimroth condenser, Friedrichs condenser.

There are no shortage of these!