No. That connection is only for data.

Activex data object Database connection Activex data object Database connection

it means that packet data connection isn't available.

It is a kind of dial-up connection

to connect java and data base...use connection stament

Connection oriented is more reliable because there is an acknowledgment received from data receiver (destination) that the data is receiving and transfer is successful which is not received from connection less protocol.

The typical data bit rate for a business Internet connection is 400 Mbit/s. This is much more than the typical data rate for a residential Internet connection which is 100 Mbit/s.

relationship

A link.

to connect java and data base...use connection stament

The difference between a dial up connect and a direct connection is that a dial up requires a connection from a phone line to a PC and the data capacity is smaller. A direct connection can transmit large amounts of data at higher speeds.

how to deal with packet data errors

Max data rate of 2133MB/s

A reliable data transfer is one that is stable . For a reliable data transfer a connection oriented protocol is used. A connection oriented protocol is one that receives acknowledgement from the receiver before sending the further data.

An wired connection is always faster than a wireless connection.

A connection string in computing is a string that specifies how to connect to a data source and information about the data source. It is commonly used in database files.

data card is a device for the net connect.

In general, transport protocols can be characterized as being either connection-oriented or connectionless. Connection-oriented services must first establish a connection with the desired service before passing any data. A connectionless service can send the data without any need to establish a connection first. In general, connection-oriented services provide some level of delivery guarantee, whereas connectionless services do not.

Connection-oriented service involves three phases: connection establishment, data transfer, and connection termination.

During connection establishment, the end nodes may reserve resources for the connection. The end nodes also may negotiate and establish certain criteria for the transfer, such as a window size used in TCP connections. This resource reservation is one of the things exploited in some denial of service (DOS) attacks. An attacking system will send many requests for establishing a connection but then will never complete the connection. The attacked computer is then left with resources allocated for many never-completed connections. Then, when an end node tries to complete an actual connection, there are not enough resources for the valid connection.

The data transfer phase occurs when the actual data is transmitted over the connection. During data transfer, most connection-oriented services will monitor for lost packets and handle resending them. The protocol is generally also responsible for putting the packets in the right sequence before passing the data up the protocol stack.

When the transfer of data is complete, the end nodes terminate the connection and release resources reserved for the connection.

Connection-oriented network services have more overhead than connectionless ones. Connection-oriented services must negotiate a connection, transfer data, and tear down the connection, whereas a connectionless transfer can simply send the data without the added overhead of creating and tearing down a connection. Each has its place in internetworks.

The amount that can be sent is confined by the End Users connection, their connection speed and the speed of the infrastructure that the data is traversing. Theoretically unlimited.

Acknowledged connection-oriented service-the source and destination machines establish a connection before any data are transferred.Each frame sent is numbered and the data link layer guarantees that each frame sent is received.

by Dardanello

Depending on what kind of data is being uploaded, either connection could be faster than the other.

In programming a "pipe" usually refers to a connection to a data source (aka a database). The difference between a queue and a pipe is that a queue usually caches some data from the data source while a pipe is just a connection to the data source.

A TCP session is a data transfer that takes place using the transmission control protocol. A session has three phases, connection establishment, data transmission, and connection termination.

data is collection of data nd is many type linear non linear homogeneous non homogeneous etc

its either

data relayrate

data transfer rate

service rate

connection rate

embedding

Acknowledged connection-oriented service-the source and destination machines establish a connection before any data are transferred.Each frame sent is numbered and the data link layer guarantees that each frame sent is received.

by Dardanello

Connection Oriented

Splice

Fiber Optics

You can connect it by using data connection.

When we create a website or a project in programming language we need to use a database for storing the data . A database connection used to establish a connection between the server and the client. For this jdbc jar is added in the project in case of java .

upper layer connection oriented protocols

acitex data object database control

DATA WILL BE SENT IN DUAL YET IN SERIES DATA WILL BE SENT IN ASINGLE LINE

Unfortunately USB travels at the slowest connection link, so as soon as the data hits your 2.0 port, then the data would only be at 2.0 speeds. Not 3.0

over the setalite

wifi

Linking

A replica.

Linking

Linking, I took a basic computer skills class back in college

COM ports transfer data using a serial connection as opposed to a parallel connection.

There is no broadband connection on mobile devices. You can only use WiFi or Data connection over mobiles network.

A T1 connection works by using a fiber optic or copper line to carry data faster than a standard phone line. It carries data at a rate approximately 60 times faster.

FTP uses separate ports for data and control.

port 20 for data

port 20 for control connection.

Inorder to avoid the extra headers and details for each and every packets which will consume the bandwidth. A separate port is used for data connection.

In a connection-oriented communication,there is a guaranteed delivery of data : any data that is not received by the destination system is re-sent by the sending device. Communication between sending and receiving device continues until the transmission has been verified. Because the connection-oriented protocol has higher overhead, it places greater demand on the bandwidth.

In contrast to connection oriented communication, connection less protocol offers only a best effort delivery mechanism because the information sent there has no conformation that data has been received. If there is error in transmission there is no mechanism to resend the data, so transmission by the connection less is no guarantee that the data is received by the destination. Connection less communication requires far less overhead than connection oriented communication. It is popular in applications such as streaming audio and video where small number packets might represent a significant problem.

A data call is a call that is made over a data network such as when you use Wi-Fi or 3G. Voice Over Internet Protocol are data calls. They are calls that use an Internet connection.

Linking

A method of data transmission in which small blocks of data are transmitted rapidly over a channel dedicated to the connection only for the duration of the packet's transmission.