answersLogoWhite

0

Search results

No. It would be more accurately referred to as a storage device.

1 answer





Still have questions?
magnify glass
imp


The smallest unit on a measuring device is typically referred to as the resolution or precision of the device. It represents the smallest increment by which the device can measure. The size of this unit will vary depending on the specific measuring device being used.

1 answer


Examples of processing device are computers, mobile phones and calculators. Any device that processes data can generally be referred to as a computer.

1 answer


It is commonly referred to as a CPR Mask, or even an ambu-bag.

2 answers


A device that stores electricity is commonly referred to as a battery.

2 answers




A node is a device connected to a network such as a computer or a game console. (Each device connected to a network is referred to as a node. A node can be a computer, printer, game console, or router.)

1 answer



It is a mass storage device. They are generally referred to by a letter, such as 'C Drive'.

1 answer





Charge-coupled device, otherwise referred to as a CCD.

1 answer


After the device is attached to the system, the end-user may reboot the system without turning off power to the system. This is referred to as a warm reboot.

The USB device, device driver, and application software must be able operate after the warm reboot.

1 answer


After the device is attached to the system, the end-user may reboot the system without turning off power to the system. This is referred to as a warm reboot.

The USB device, device driver, and application software must be able operate after the warm reboot.

1 answer


It is commonly referred to as an 'output' device because it (typically) does not send information back to the computer.

A mouse would be considered and 'input' device because it is sending information back to the computer.

1 answer


It is commonly referred to as an 'output' device because it (typically) does not send information back to the computer.

A mouse would be considered and 'input' device because it is sending information back to the computer.

1 answer


64.4.34.31 is an internet protocol address. It probably belongs to some computer device hooked up to the intertubes and could not be referred to as "who"

1 answer


煞車 [sha che]. It can be referred to as the device that slows the vehicle down, or the action to activate the brakes.

1 answer


It is referred to as electrically activated an controlled. It is, however, still a mechanical device with gears and pumps and so on.

1 answer


Your input device, for example a mouse, is connected to your input medium, your computer.

an input device is a device that is used to input or helps to enter data into the computer and an input medium is where the input device is detected e.g the slots

4 answers


The third device in the iPad line was iPad (often referred to as iPad 3 and marketed as "the new iPad"), which was announced on March 7, 2012 and released for purchase on March 16, 2012.

1 answer


A shackle for the wrist is commonly referred to as a handcuff. It is a device used for restraining a person's hands by locking them together.

2 answers


A device that produces energy is often referred to as a generator. Generators convert mechanical energy into electrical energy.

1 answer


The name of the program that lets your computer to communicate with hardware devices is call KERNEL. Kernel communicates between hardware and software of a computer and manages how hardware resources are used to meet software requirements

5 answers


No, it is classed as an output device - same as the computer's monitor. Both of which show the result of your input from the keyboard, etc.

3 answers


A moving chair is typically referred to as a wheelchair. It is a device with wheels that helps individuals who have difficulty walking or standing to move around.

1 answer


A file is often referred to as a collection of data or information stored on a computer or storage device under a specific name or location. It can contain text, images, video, programs, or any other type of data.

2 answers


Many computer commands move data from one file to another or from one storage device to another. This is referred to as moving the data from the source to the destination (or target). The term is also used as an adjective, as in destination file or destination device.

So basically where every your moving your file or etc... too is the destination device.

1 answer


Thomas Edison invented the phonograph in 1877. This device for recording and reproducing sound recordings was also referred to as a gramophone or a record player.

1 answer


My Guess is a Guillotine- properly an execution device. My guess is also this morbid piece of hardware was the item referred to but never accurately described in the novelty song ( The Thing) by Phil Harris. It has the required three sylabbles.

1 answer


COM1 and COM2 originally referred to the serial port interfaces on a PC. Now they can refer to any port, virtual or physical.

2 answers


A large suitcase is usually referred to as a trunk. Trunks usually house large items that the traveler may need such as a medical device, instrument, or electronics.

1 answer


A digital video recorder (DVR), sometimes referred to by the merchandising term personal video recorder (PVR), is a consumer electronics device or application software that records video in a digital format to a disk drive, USB flash drive, SD memory card, SSD or other local or networked mass storage device.

1 answer


You call it a supercharger. It is referred to as a blower in some places.

It is a mechanically driven device to increase the air flow into an engine, this will increase the engines output power.

1 answer


A gizmo is simply a device for which the speaker either does not know or has forgotten the actual name. It is impossible to determine what function a gizmo has unless we know what specific device is actually being referred to. Other terms that are commonly used in this way include "thingumabob", "thingumyjig", "doohickey" and "whatchamacallit".

1 answer


manages the component including cpu memory storage nd periphral devices. Operating system ,device drive, motherboard ,ports

1 answer


A thermometer is considered an instrument, as it is a device used to measure temperature. It is not typically referred to as equipment, which usually implies a larger and more complex set of tools or machinery.

1 answer


Narrow-Band (also referred to as short-wave) is a term used to describe the amplitude of a radio device. Narrow-band devices are limited to an average of 400m.

1 answer


To charge a device, usually referred to as "didge," you would need to connect it to a power source using the supplied charging cable. Follow the manufacturer's instructions on how long to charge the device, typically until the battery is full. Be sure to use a compatible charger to avoid damaging the didge.

1 answer


On Windows, those are usually referred to as "drivers." On Mac OS X, they are referred to as "kexts", or "kernel extensions." On Windows, if they are not already built into the kernel, they are called "modules."

4 answers


It is referred to as a "Bull."

It is referred to as a "Bull."

It is referred to as a "Bull."

It is referred to as a "Bull."

It is referred to as a "Bull."

It is referred to as a "Bull."

2 answers


There are a number of optical devices used on firearms. The most common is a telescoping sight, usually referred to as a "scope". There are others however, that while optical, do not magnify the image. These are sometimes referred to as "red dot" sights, and they use a sighting method that seems to suspend a red dot in the air where the bullet impact will be. Another version of the same thing is referred to as a "holographic" sight.

1 answer


Standby power

<><><>

Sometimes referred to a "Vampire Usage"- the power consumed by leaving a charger plugged in, even when not charging a device.

1 answer


Some chargers consume a small amount of power when plugged in, even if no device is attached, due to standby power consumption. This is often referred to as "vampire power" or "phantom load." To minimize energy waste, it is recommended to unplug chargers when not in use.

2 answers