1. Inspect VSV for open circuit.

* Using an ohmmeter, check that there is continuity between the terminals.

Resistance: At 20Â°C (68Â°F): 33 - 39 Ohms

* If there is no continuity, replace the VSV.

2. Inspect VSV for ground.

* Using an ohmmeter, check that there is no continuity between each terminal and the body.

* If there is continuity, replace the VSV.

3. Inspect VSV operation.

View Full Image

* Apply battery positive voltage across the terminals.

* Check that the air flows from ports E to F.

* If operation is not as specified, replace the VSV.

3. REINSTALL VSV FOR VAPOR PRESSURE SENSOR

VSV for EVAP Inspection

1. REMOVE VSV for EVAP

* Disconnect the connector and 2 EVAP hoses from the VSV for EVAP.

* Remove the screw and VSV for EVAP

2. INSPECT VSV for EVAP

1. Inspect VSV for EVAP for open circuit

* Using an ohmmeter, check that there is continuity between the terminals.

Resistance: At 20Â°C (68Â°F): 30-34 Ohms

* If there is no continuity, replace the VSV for EVAP.

2. Inspect VSV for EVAP for ground

* Using an ohmmeter, check that there is no continuity between each terminal and the body.

* If there is continuity, replace the VSV for EVAP.

3. Inspect VSV for EVAP operation

View Full Image

* Check that air flows from ports E to F.

* If operation is not as specified, replace the VSV for EVAP.

3. REINSTALL VSV for EVAP

Resources

Top Categories