Frequency mixer: Information from Answers.com

Frequency Mixer Symbol.

Please help improve this article by expanding it. Further information might be found on the talk page. (May 2008)

In telecommunications, a mixer is a nonlinear or time-varying circuit or device that accepts as its input two different frequencies and presents at its output a mixture of signals at several frequencies:

the sum of the frequencies of the input signals
the difference between the frequencies of the input signals
both original input frequencies — these are often considered parasitic and are filtered out in subsequent filter stages.
- a balanced mixer passes only a small leakage of the original signal to the output, often implemented as a double balanced mixer which has high isolation of both inputs.
unwanted intermodulation products from the inputs.

This nonlinear effect can be created by using a nonlinear electrical component, such as a diode. The time-varying effect can be created using a multiplier circuit such as a Gilbert Cell or passive switches.

The manipulations of frequency performed by a mixer can be used to move signals between bands, or to encode and decode them. One other application of a mixer is as a product detector.

1 Mathematical description
- 1.1 Multiplication implementation
- 1.2 Output
2 Switching
3 See also
4 External links

Mathematical description

The input signals are, in the simplest case, sinusoidal voltage waves, representable as

$v_i(t) = A_i \sin 2\pi f_i t\,$

where each A is an amplitude, each f is a frequency, and t represents time. (In reality even such simple waves can have various phases, but that does not enter here.) One common approach for adding and subtracting the frequencies is to multiply the two signals; using the trigonometric identity

$\sin(A) \cdot \sin(B) \equiv \frac{1}{2}\left[\cos(A-B)-\cos(A+B)\right]$

we have

$v_1(t)v_2(t) = \frac{A_1 A_2}{2}\left[\cos 2\pi(f_1-f_2)t-\cos 2\pi(f_1+f_2)t\right]$

where the sum ( $f 1 + f 2$ ) and difference ( $f 1 - f 2$ ) frequencies appear. This is the inverse of the production of acoustic beats.

Multiplication implementation

There are various ways of multiplying voltages, many of them quite sophisticated. However, as an example, a simple technique involving a diode can be described. The importance of the diode is that it is non-linear (or non-Ohmic), which means its response (current) is not proportional to its input (voltage). The diode therefore does not reproduce the frequencies of its driving voltage in the current through it, which allows the desired frequency manipulation. Certain other non-linear devices could be utilized similarly.

The current I through an ideal diode as a function of the voltage V across it is given by

$I=I_\mathrm{S} \left( e^{qV_\mathrm{D} \over nkT}-1 \right)$

where what is important is that V appears in e's exponent. The exponential can be expanded as

$e^x = \sum_{n=0}^\infty \frac{x^n}{n!}$

and can be approximated for small x (that is, small voltages) by the first few terms of that series:

$e^x-1\approx x + \frac{x^2}{2}$

Suppose that the sum of the two input signals $v 1 + v 2$ is applied to a diode, and that an output voltage is generated that is proportional to the current through the diode (perhaps by providing the voltage that is present across a resistor in series with the diode). Then, disregarding the constants in the diode equation, the output voltage will have the form

$v_\mathrm{o} = (v_1+v_2)+\frac12 (v_1+v_2)^2 + \dots$

The first term on the right is the original two signals, as expected, followed by the square of the sum, which can be rewritten as $(v_1+v_2)^2 = v_1^2 + 2 v_1 v_2 + v_2^2$ , where the multiplied signal is obvious. The ellipsis represents all the higher powers of the sum which we assume to be negligible for small signals.

Output

As every multiplication produces sum and difference frequencies, from the quadratic term of the series we expect to find signals at frequencies $2 f 1$ and $2 f 2$ from $v_1^2$ and $v_2^2$ , and $f 1 + f 2$ and $f 1 - f 2$ from the $v 1 v 2$ term. Often $f_1,f_2\gg|f_1-f_2|$ , so the difference signal has a much lower frequency than the others; extracting this distinct signal is often the principal purpose of using a mixer in such devices as radio receivers.

The other terms of the series give rise to a number of other, weaker signals at various frequencies which act as noise for the desired signal; they may be filtered out downstream to an extent, but sensitive applications will require cleaner output and thus a more complicated design.

Switching

Another form of mixer operates by switching, with the smaller input signal being passed inverted or uninverted according to the phase of the local oscillator. This would be typical of the normal operating mode of a packaged double balanced mixer module such as an SBL-1, with the local oscillator drive considerably higher than the signal amplitude.

The aim of a switching mixer is to achieve linear operation over the signal level, and hard switching driven by the local oscillator.

External links

Wikimedia Commons has media related to: Radio electronic diagrams

This article incorporates public domain material from the General Services Administration document "Federal Standard 1037C".

This entry is from Wikipedia, the leading user-contributed encyclopedia. It may not have been reviewed by professional editors (see full disclaimer)

Donate to Wikimedia

	local oscillator (electronics)
	desensitization
	Intermediate-frequency amplifier (electronic circuits)

	What does a personal mixer do? Read answer...
	What is noise in mixers? Read answer...
	A virtual mixer is what? Read answer...

	Is a function performed by a mixer circuit in frequency conversion?
	How the constant frequency term is eliminated in the mixer of cw radar?
	What is the difference between frequency mixer and summer in communication system?

Frequency mixer

Contents

Mathematical description

Multiplication implementation

Output

Switching

See also

External links