Results for: Hieronymous-machine
In CPR

What is a aed machine?

An AED or Automated External Defibrillator is the professional name for a defibrillator. The device is used to shock the heart back into a normal rhythm, ultimately reviving t… (MORE)
In Asian Cars

What does a machine shop do when machineing a head?

When machining a head basically. Basically just shaves off the head to increase combustion or give you higher compression. This is only a partial answer. A machine shop will c… (MORE)
In Mechanical Engineering

What is NC machining and CNC machining?

A lathe is a device that turns a work piece on a spindle. Cutters are used to make cylindrically symmetrical pieces (think of table legs). In general, NC (numerically contro… (MORE)
In Industrial Engineering

What is proof machining?

Proof machining means>> If part have too much dispensable  material to remove through out machining than machining is done on  the same to remove all material till it will h… (MORE)
In Industrial Engineering

What is a machining center?

Machining Center is nothing but highly automated machine tool  capable of performing multiple machining operations under CNC  control.    Automatic tool changer.  Pal… (MORE)
In Technology

What is machining?

Machining usually refers to performing a mechanical process on a workpiece of any material that changes its physical properties in some way. More commonly it means to use mach… (MORE)
In Rhyming Words

What rhymes with machine?

    Well, Merriam-Webster says that a rhyme is a "correspondence in terminal sounds" of two words. So if the terminal sound in machine is "een", many words rhyme, such… (MORE)
In Math and Arithmetic

What is the answer to 20c plus 5 equals 5c plus 65?

20c + 5 = 5c + 65 Divide through by 5: 4c + 1 = c + 13 Subtract c from both sides: 3c + 1 = 13 Subtract 1 from both sides: 3c = 12 Divide both sides by 3: c = 4
Thanks for the feedback!
In Technology

How do you machine an angle on a milling machine?

It depends on what milling machine you are using. If its the over head type (looks like a drilling machine) or if its the type where an arbour runs horizontal to the machine -… (MORE)