| Sci-Tech Dictionary: hydraulic fluid |
(materials) A low-viscosity fluid used in operating a hydraulic mechanism.
Hydraulic fluid
| 5min Related Video: Hydraulic fluid |
| Veterinary Dictionary: hydraulic fluid |
Toxic because of its high content of industrial triaryl phosphate.
| Wikipedia: Hydraulic fluid |
Hydraulic fluids, also called hydraulic liquids, are the medium by which power is transferred in hydraulic machinery. Common hydraulic fluids are based on mineral oil or water. [1] Examples of equipment that might use hydraulic fluids include excavators, brakes, power steering systems, transmissions, backhoes, garbage trucks, aircraft flight control systems and industrial machinery.
Hydraulic systems like the ones mentioned above will work most efficiently if the hydraulic fluid used has low compressibility.
Contents |
Functions and properties
The primary function of a hydraulic fluid is to convey power. In use, however, there are other important functions of hydraulic fluid such as protection of the hydraulic machine components. The table below lists the major functions of a hydraulic fluid and the properties of a fluid that affect its ability to perform that function:[2]
| Function | Property |
|---|---|
| Medium for power transfer and control |
|
| Medium for heat transfer |
|
| Sealing Medium |
|
| Lubricant |
|
| Pump efficiency |
|
| Special function |
|
| Environmental impact |
|
| Functioning life |
|
Composition
Base stock
The original hydraulic fluid, dating back to the time of ancient Egypt, was water. Beginning in the 1920s, mineral oil began to be used more than water as a base stock due to its inherent lubrication properties and ability to be used at temperatures above the boiling point of water. Today most hydraulic fluids are based on mineral oil base stocks.
Natural oils such as rapeseed (also called canola oil) are used as base stocks for fluids where biodegradability and renewable sources are considered important.
Other base stocks are used for specialty applications, such as for fire resistant and extreme temperature applications. Some examples include: glycol, esters, organophosphate ester, polyalphaolefin, propylene glycol, and silicone oils.
Other components
Hydraulic fluids can contain a wide range of chemical compounds, including: oils, butanol, esters (e.g. phthalates, like DEHP, and adipates, like bis(2-ethylhexyl) adipate), polyalkylene glycols (PAG), phosphate esters (e.g. tributylphosphate), silicones, alkylated aromatic hydrocarbons, polyalphaolefins (PAO) (e.g. polyisobutenes), corrosion inhibitors, etc.
Biodegradable hydraulic fluids
Environmentally sensitive applications (e.g. farm tractors and marine dredging) may benefit from using biodegradable hydraulic fluids based upon rapeseed (Canola) vegetable oil when there is the risk of an oil spill from a ruptured oil line. Typically these oils are available as ISO 32, ISO 46, and ISO 68 specification oils. ASTM standards ASTM-D-6006, Guide for Assessing Biodegradability of Hydraulic Fluids and ASTM-D-6046, Standard Classification of Hydraulic Fluids for Environmental Impact are relevant.
Brake fluid
Brake fluid is a subtype of hydraulic fluid with high boiling point and low freezing point. It is intentionally hygroscopic, so that it will absorb water which could otherwise cause corrosion of brake system components.
Safety
Because industrial hydraulic systems operate at hundreds to thousands of PSI and temperatures reaching hundreds of degrees Celsius, severe injuries and death can result from component failures and care must always be taken when performing maintenance on hydraulic systems.
Fire resistance is a property available with specialized fluids.
Trade names
Some of the trade names for hydraulic fluids include Tellus, Durad, Fyrquel, Houghton-Safe, Hydraunycoil, Lubritherm Enviro-Safe, Pydraul, Quintolubric, Reofos, Reolube, and Skydrol.
Aircraft hydraulic systems
The use of hydraulic systems in aircraft almost certainly began with braking systems.[citation needed] As aircraft performance increased in mid-20th century, the amount of force required to operate mechanical flight controls became excessive, and hydraulic systems were introduced to reduce pilot effort. The hydraulic actuators are controlled by valves; these in turn are operated directly by input from the aircrew (hydro-mechanical) or by computers obeying control laws (fly by wire). See flight controls.
Hydraulic power is used for other purposes. It can be stored in accumulators to start an auxiliary power unit (APU) for self-starting the aircraft's main engines. Many aircraft equipped with the M61 family of cannon use hydraulic power to drive the gun system, permitting reliable high rates of fire.
The hydraulic power itself comes from pumps driven by the engines directly, or by electrically driven pumps. In modern commercial aircraft these are electrically driven pumps; should all the engines fail in flight the pilot will deploy a propeller-driven electric generator which is concealed under the fuselage.[3] This provides electrical power for the hydraulic pumps and control systems as power is no longer available from the engines. In that system and others electric pumps can provide both redundancy and the means of operating hydraulic systems without the engines operating, which can be very useful during maintenance.
Specifications
Aircraft hydraulic fluids fall under various specifications:
Common petroleum-based:
- Mil-H-5606: Mineral base, flammable, fairly low flashpoint, usable from −65 °F (−54 °C) to 275 °F (135 °C), red color
- Mil-H-83282: Synthetic hydrocarbon base, higher flashpoint, self-extinguishing, backward compatible to -5606, red color
- Mil-H-87257: A development of -83282 fluid to improve its low temperature viscosity.
Phosphate-ester based:
- BMS 3-11: Skydrol 500B-4, Skydrol LD-4, Skydrol 5 and Exxon HyJetIV-A plus – Typically light purple, not compatible with petroleum-based fluids, will not support combustion.
Contamination
Special, stringent care is required when handling aircraft hydraulic fluid as it is critical to flight safety that it stay free from contamination. It is also necessary to strictly adhere to authorized references when servicing or repairing any aircraft system. Samples from aircraft hydraulic systems are taken during heavy aircraft maintenance checks to check contamination.
See also
|
||||||||
|
||||||||||||||
References
- ^ Givens W. and Michael P., Fuels and Lubricants Handbook, G. Totten ed., ASTM International, 2003, p. 373 ISBN 0-8031-2096-6
- ^ Placek, D., Synthetics, Mineral Oils and Bio-based Lubricants, L. Rudnick ed., CRC Press, 2006, p. 519 ISBN 1-57444-723-8
- ^ Discovery channel-'seconds from disaster'
External links
This entry is from Wikipedia, the leading user-contributed encyclopedia. It may not have been reviewed by professional editors (see full disclaimer)
Learn More
 | directional control valve (engineering) |
| closing-unit pump (petroleum engineering) |
| hydraulic accumulator (mechanical engineering) |
 | What type of hydraulic fluid is specified for a 1967 Mustang convertible hydraulic pump? Read answer... |
| Where is the hydraulic resevoir on a 1989 Ford Bronco II 4sped manual with OD and how do you add more hydraulic fluid? Read answer... |
| How do you add hydraulic fluid to a hydraulic floor jack? Read answer... |
Help us answer these
 | Does hydraulic fluid evaporate or burn We have a backhoe and the hydraulic fluid levels in the transmission is going down I didn't think hydraulic fluid burned like motor oil does? |
| What hydraulic pump generates the pressure to force hydraulic fluid through 100 000 km of tubes? |
| How many gallons per minute of hydraulic fluid does a Ford 2600 tractor use when it is operating a hydraulic top dresser? |
Post a question - any question - to the WikiAnswers community:
Copyrights:
 |
 | Sci-Tech Dictionary. McGraw-Hill Dictionary of Scientific and Technical Terms. Copyright © 2003, 1994, 1989, 1984, 1978, 1976, 1974 by McGraw-Hill Companies, Inc. All rights reserved. Read more |
 |
| Veterinary Dictionary. Saunders Comprehensive Veterinary Dictionary 3rd Edition. Copyright © 2007 by D.C. Blood, V.P. Studdert and C.C. Gay, Elsevier. All rights reserved. Read more |
 |
| Wikipedia. This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article "Hydraulic fluid". Read more |
Related answers
- Is hydraulic fluid for a jack different from hydraulic brake fluid in a car?
- How do you drain hydraulic fluid from a hydraulic floor jack?
ADVERTISEMENT
Answer these
- What is the difference in hydraulic fluid and tractor hydraulic fluid?
- What type of hydraulic fluid for k30 chevy hydraulic clutch?
Mentioned in
- directional control valve (engineering)
- closing-unit pump (petroleum engineering)
- hydraulic accumulator (mechanical engineering)
- power cylinder (control systems)
- diaphragm pump (mechanical engineering)
- hexachlorobutadiene (organic chemistry)
- hexachloropropylene (organic chemistry)
- 1,5-pentanediol (organic chemistry)
- tetra-(2-ethylbutyl)silicate (organic chemistry)
- vane motor rotary actuator (mechanical engineering)
- evorsion
- Investigative Reports: The Planes that Fell to Earth (Film)
- hydraulic (Technology)
- F&B Manufacturing Company (Private Company)
|
